precision butt hinge
James Clair
>Looking for a good source for precision butt hinges for small boxes. I would like to keep the cost around $10-15 a pair.
Knowledge You Can Build On — Est. 1998
precision butt hinge
James Clair
>Looking for a good source for precision butt hinges for small boxes. I would like to keep the cost around $10-15 a pair.
Whitechapel
Bill Tindall, E.TN
>These are the only hinges I will use. They are tight. Specify screw length when you order. Otherwise they guess a screw length and may guess wrong.
PS
Bill Tindall, E.TN
>request a catalog. It is full of helpful hardware installation tips.
307 739 9478
I've used these...
John in New Mexico
>http://www.woodcraft.com/family.aspx?FamilyID=1010
The smallest ones, 1" x 5/8", make a great box hinge, nice and heavy.
Re: precision butt hinge
Bart Goldberg
>Hi James,
I use Brusso hinges - they are very high quality, but are a bit pricey. Whitechapel carries them as well as lots of other retailers. Shop around for your best price. I think I've purchased them in quantity for less the $20/pr (depending on which model).
Good Luck
Bart
Re: precision butt hinge *LINK*
Jim Dillon
>James,
While I have never used Butt hinges per se, Brusso Butt hinges are available from Tools For Working Wood (TFMW). I have ordered many Brusso box hinges from TFMW and found they offer excellent service and a nice 10% discount if you buy 4 or more pairs. While not inexpensive, the Brusso hinges are solid brass and of excellent quality. Hope this helps.
Re: precision butt hinge
David Yoho
>I like the brass butt hinges from Horton Brasses. They are very precise and excellent quality. I paid $14 a pair for the 1-1/2" x 2-1/2" brass hinges. I haven't looked for smaller there but it is worth a look.
David
Re: precision butt hinge
James Clair
>Thank you all very much. I have found what I am looking for. Whitechaple was very helpfull.