Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Finishing Exterior Fiberglass Door

Posts

Finishing Exterior Fiberglass Door

#1

Finishing Exterior Fiberglass Door

howard

>I have two therma-tru doors to finish. Is it necessary to use their kit, which is very expensive for a very small quantity, around $43. I was planning on using Minwax gel-stain with a spar varnish topcoat. What would you recommend. Thanks for the help.

Re: Finishing Exterior Fiberglass Door

#2

JL

Re: Finishing Exterior Fiberglass Door

JL

>Any good oil-based gel stain should work.

As far as the spar varnish? The more UV protectants in the varnish the better.

My $0.02.

Re: Finishing Exterior Fiberglass Door

#3

Re: Finishing Exterior Fiberglass Door

Robert W

>I have finshed many Therma Tru doors (it's part of my business) and the finishing kit they supply is a pretty good deal. The can of stain is tiny, but it must be almost all solids as the color and uniformity is outstanding in application. Coupled with their sealer, it makes a good finish on the door. And using their products, there is no question of compatibility.

But when folks don't want to wait for the kit or they don't like the colors offered, I stain with Old Master's gel stain. It works well, just work quickly with it using a good applicator. Over the stain, I put either a good varnish or polyurethane, depending on the client's needs. If there is more sun exposure than not, I use spar. It is softer than poly, but hold up to the sun better. If the door is in a covered porch and gets little or limited sun, I used poly as it is hard and more abrasion resistant making the finish last longer.

Robert

Re: Finishing Exterior Fiberglass Door

#4

Jason Roehl in Lafayette, IN

Re: Finishing Exterior Fiberglass Door

Jason Roehl in Lafayette, IN

>I've finished quite a few myself. The Therma-tru kit is very good. Otherwise, I use ZAR products--their oil-based stain, which is very thick, but not quite a gel stain, then I topcoat with their exterior waterborne poly (it's about $17/qt!) There are some doors I did on some rental units about 5 years ago, and they still look decent (they probably need to be recoated, but you know how cheap landlords can be...)

Jason

Re: Finishing Exterior Fiberglass Door

#5

Thanks................

howard

>seems like I should consider Therma-Tru's own kit. Thanks again