Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

trunk dovetail layout question

Posts

trunk dovetail layout question

#1

trunk dovetail layout question

Bill Tindall, E.TN

>Because I don't have occasion to do it often, and it needs to be done right the first time, I lay out a dovetail pattern to scale on paper to develop spacing, size and other decisions. I did this for the trunk as I would a drawer, starting with a half pin on the board with tails (which is the trunk front). I think it looks strange.

I have several dozen trunk pictures in books and none clear enough to see this detail. I can see that trunks have tails on the front of the trunk, but I can't tell if the pattern starts with a half pin or a half tail.

So, what is the convention for a trunk? There likely will be no molding to cover either the top or bottom of the front board so this detail will show.

Re: trunk dovetail layout question

#2

Re: trunk dovetail layout question

David Yoho

>Bill, be it a drawer or a chest, I always start and end the layout with a half-pin for through dovetails. I've found this to be the traditional method but you could always depart from that if you want.