Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

My lacquer is embarrassed

Posts

My lacquer is embarrassed

#1

Dale Lenz

My lacquer is embarrassed

Dale Lenz

>Spraying lacquer today, 100% RH outside, got the whitish-blushing effect for the first time. Added about 20% S-W Butyl Cellosolve, lacquer retarder to the mixed, seemed to solve the problem. My questions: What can I expect from adding the lacquer retarder; slower drying time between sanding. Usually, let item cure for 3 days prior to polishing out lacquer for high sheen. Will I need to allow more time, 4 days? Any noticeable difference in sheen, more difficult to get sheen because of less brittle material, etc.

TIA,

Dale

Re: My lacquer is embarrassed

#2

give it time

Bill Tindall, E.TN

>That is way more than I typically add. Next time try 5% and see if that solves the problem. It will all go away and have no lingering effects, given time. A good test is to put the piece in a confined space and give it the sniff test. If you smell solvent, well, it's not gone yet.

I just broke a small bottle of this stuff in the shop. Solvents in a glass bottle- dumb I know. I am not a chemophobe, but never the less, I am not fond of its odor and the shop reeks of it which is why I am killing time on the computer rather than chopping dovetails in the trunk as I should be doing. Worse yet, the bottle is old and some hydrolysis had occurred so what I am really smelling is a mix of solvent and butyric acid -yuck!

Re: My lacquer is embarrassed

#3

Dale Lenz

Re: give it time

Dale Lenz

>Thanks for the reply, Bill. Actually, I started out with about 10% retarder, helped. So added about 10% more. I understand your sniff test. What about material quality after fumes are gone? Same hardness of lacquer etc.?

Re: My lacquer is embarrassed

#4

Re: give it time

Mark Mandell - Gone Round In Jersey

>Lacquer minus solvent = cured lacquer.

Now if there's something like a plasticizer in that retarder you'll have a softer film.

Depending on the lacquer, I wait at least 2 weeks to rub out.

Re: My lacquer is embarrassed

#5

Re: My lacquer is embarrassed

Fred Davis

>I Have in the past before I built a climate controlled shop had luck with shooting the blush with a slow lacquer thinner, if that didn't work, then onto the retarder which I don't think interferes witht the curing shedule you follow.

FredD

Re: My lacquer is embarrassed

#6

Film will cure properly

Bill Tindall, E.TN

>Once it is gone the final film will be as usual, but it may take a bit to get it all gone. Be wary of heating the piece to hasten the process. I won't go into details as to why I offer this warning! A uniform heating in a hot room is ok. Direct summer sun may not be.