Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Walking shoes for conrete floor / workshop

Posts

Walking shoes for conrete floor / workshop

#1

Walking shoes for conrete floor / workshop

North of the Border

>Can anyone recommend some shoes that are best for walking and working on concrete floor say for 6 - 8 hours a day, 3 days a week? I heard Rockport shoes are good for that purposes but wonder if there're other suitable ones to choose. I also plan to wear those when I work in my shop say for 6 - 8 hours at a time. As I'm getting old, I find it important to give the best care my feet deserve. Thanks for any ideas (if pricing info. is also available, that'd even be better).

Re: Walking shoes for conrete floor / workshop

#2

Re: Walking shoes for conrete floor / workshop

Fred Davis

>I have worn Redwing "Setter" ten inch boots leather inside and oil tanned outside with a thick crepe sole all of my work life and still at 71 wear them six days a week regardless of whether I am in the shop , or shooting pool.

These boots will protect your feet and lower legs from many hazards that shoes won't.

I do have to change for bowling though. ;-))

This is very comfortable footwear and combined with Redwing 100 % cotton OTC socks do very well for me.

FredD

Re: Walking shoes for conrete floor / workshop

#3

Re: Walking shoes for conrete floor / workshop

Rob Stokes in North Vancouver

>I picked up some of the interlocking puzzle pieces (black) sold at Walmart for $10/package. The stuff did wonders for my back after a day in the shop.

Rob

Re: Walking shoes for conrete floor / workshop

#4

Nike Air

Mark Goodall - ATL - tooljunkie

>

Re: Walking shoes for conrete floor / workshop

#5

more on Red Wing

Bill Tindall, E.TN

>I have been a fan of Red Wing too. I used to fish in the River near the factory and at one time the family owned a dozen or more pairs of various kinds of Red Wing work and hiking shoes. However.........

I have worn the 6" work boots for decades for outdoor work. I buy a new pair some time before the old pair is completely shot so I wind up with a comparison between new and old. The last pair I got does not have the arch support of the previous boot and I feel it after several hours of working in them whether I am on dirt or whatever.

I bought a pair of very good looking US made work boots from Duluth Trading and they are nearly flat footed and hurt my feet so bad I can't wear them for more than an hour or two.. For some reason many manufacturers don't put a steel arch in a shoe anymore and instead rely on an insert to provide an arch, which I find useless.

For me, comfort is determined by an elevated heel and a robust arch. Merrill hiking shoes/boots are best for me in this regard and in a dress shoe, SAS. In days of old Clark made a good shoe but not any more. I have a pair of Merrill low hikers that I wear in the shop and to woodworking shows, and I can stand in them all day.

The bottom line is that squishy does not necessarily yield comfort. Comfort may depend more on arch and heel elevation. Is there a foot Doc in the house that can explain all this?

Re: Walking shoes for conrete floor / workshop

#6

JL

Re: Walking shoes for conrete floor / workshop

JL

>I have worn Rockport's Pro-Walkers for years. In my old lab jobs, I was often on my feet all day. I still wear the Pro-Walkers now that I've left work. I have work mats at the lathe, my work bench and my table saw. I've got another mat that I haven't figured out a place for also :).

Re: Walking shoes for conrete floor / workshop

#7

'nother vote for red wing!

Jesse Cloud

>

Re: Walking shoes for conrete floor / workshop

#8

Re: more on Red Wing

Bill Sams

>Ditto Bill! I stopped being able to wear redwing because of the change of/lack of arch and heel support. I used to swear by redwing but no longer.

In the last year, ending up at K-mart/Sears and buying Tom Mcann boots. Still not much support, but better than redwing at this point.

Note- a foot doc said at night to roll your arches over a tennis ball, while reading etc. This has in fact helped the "pain in my arch" :-)

Re: Walking shoes for conrete floor / workshop

#9

Clogs

Ryan Stagg - Cincinnati

>I spend as much time in the kitchen as in the shop, so I got used to wearing black Dansko clogs. The choice of chefs who work on tile all day everwhere, they're also very comfy on a concrete shop floor. And pretty tough, to boot.

Re: Walking shoes for conrete floor / workshop

#10

Dale Lenz

Re: What's its worth to you? *LINK*

Dale Lenz

>I've have Rockports, very good. Never had Redwing, known several that have, good boots, but they have switched to White's Boots. Good is a relative term. Rockports, Redwings and many others are good boots/shoes. Whites are Great(!), Cost~400 bucks. As a forester, I've had several 200 dollars boots, and within a year my feet hurt by 5 O'clock, did not enjoy shop time in the evenings.

I'd heard of White's since my first forestry job in '79, as all seasoned wildland firefighter had them. Dec. 2000 I bit the bullet and ordered a pair, one of the smarter things I've done in life. Wear mine 16-7, and still going, will send them back in, in a year or two to be rebuilt.

My son's is starting his career as an auto-mech, just order him a pair of White's farmer-ranches boots, Hope he is as pleased as I've been with mine. Note: I do purchase 15-20 dollar inserts about twice a year.


White's Boots

Re: Walking shoes for conrete floor / workshop

#11

Re: Walking shoes for conrete floor / workshop

Joe Pack

>The school district I worked for moved from a 1904 building with wood flooring to a 2005 model with concrete floors. I stood on my old squeaky wood floor 6+ hours a day, wearing dress shoes. The same dress shoes on the concrete floor left me all but unable to walk to my car in the parking lot.

I tried several different shoes, including a dressier RedWing work model and a couple of Mason work type shoes. I finally tried New Balance walking and/or cross trainiing shoes and never looked back. I buy New Balance models with model numbers of 6xx or higher. The 690s are mostly for outside work, while the 9xx models are for standing on concrete. In general, the higher the number, the more cushioning the shoe. After about 6 months, I replace the original insert with a Dr. Scholl's foam or gel insert and get another 6 months wear. When the 900s finally break down (about 1 year or so), I use them for outside shoes where the ground softens impact. Total use from a pair of 900s is about 2-3 years.

Unless you need steel toes, the New Balance shoes can't be beat. And they are made in the U.S., not in Asia.

Re: Walking shoes for conrete floor / workshop

#12

Any good shoes/boots, plus Sorbothane *LINK*

Henry Higginbotham

>I've used this particular brand for fifteen years or so, and the original pair is still going strong in some work shoes, after serving a few hundred miles in hiking boots. The current model is a bit different, having a bonded fabric top liner, so I can't yet comment on durability.

When I first tried these, I was about to give up hiking. The difference was amazing. And don't even THINK of associating these with those crappy, squishy, gel insoles from Kmart and such.

Somewhat pricey, but cheap compared to most others when amortized over their long life. No association with the linked company, although that's where I got the last ones.


SorboAir insoles

Re: Walking shoes for conrete floor / workshop

#13

Red Wings with . . .

steve mackay

>Vibram soles. Not the big, deep lugs ! Those track TONS of stuff into the house ! Since retiring and not wearing combat boots for a living I ONLY wear my Wings. A bit pricey but last four or five years before re-soleing ( again and again ). VERY comfy boots and well worth the investment !

Re: Walking shoes for conrete floor / workshop

#14

ReThanks for all the suggestions and comments.

North of the Border

>

Re: Walking shoes for conrete floor / workshop

#15

If only.....

Bill Tindall, E.TN

>they made a 6" or even lower shoe with a non-mud attracting sole. I used to wear 8" boots. Then I got older and wiser and went to 6". Good for around the farm to keep stuff out of the tops, but for the shop and trail hiking I now wear ankle height shoes. Can't see any reason to carry around such high boots as White's sells.

This is an honest question- why would an auto mechanic want such high boots?

Re: Walking shoes for conrete floor / workshop

#16

Dale Lenz

Re: Honest Answer *LINK*

Dale Lenz

>Help prevent twisting an ankle. Mech is under a car on a lift, stuff on the ground, mech eyes on on the car's underparts, you know the rest of the story. Most of the mech at my son's Ford garage wears tennis shoes, not safe in my opinion.

Most of White's boots can be ordered w/o lug soles. My son's boots will have the non lugged soles. Vibram lug soles do track in trash, that's for sure. Got a pair of Danner's boots once, with the black "sponge" soles, very comfortable. Problem: Kept falling on my butt at night walking down hills. Decided a chewing from the wife was better than a broken back.

For a pair of 5" utility boot/shoes(?) check out the link below and scroll down for dress shoes.


White's utility footwear

Re: Walking shoes for conrete floor / workshop

#17

Re: Any good shoes/boots, plus Sorbothane

Fred Davis

>Henry,

I ordered the two pack of insoles, hope your right.

FredD

Re: Walking shoes for conrete floor / workshop

#18

Re: Walking shoes for conrete floor / workshop

Spencer

>I, too, need arches for comfort. I also need a little cushion for the rest of my foot. I've taken to buying a mid-priced boot with either a completely flat insole or one of the cheesy ones that is easily removed to expose a completely flat insole. The boot must also have ample toe room because my feet are very claustrophobic. With the insole removed, I replace it with the highest quality aftermarket insole I can find. I had been buying them at drug stores and the pricier ones there (~$25) work well. I usually get two or three pairs of shoes use out of each pair of insoles and my feet don't hurt at the end of a long day on concrete/stone floors. The best insole that I've purchased to date is made by Lynco. I went with the one at the store that had the highest arch. I think it may have been one of the athletic versions (there are many versions). I paid about $50 for them and will probably buy another pair when the ones I have wear out.

I recently purchased a pair of shoes that I had my eyes on for a few years, but could not swallow the $200 price tag without knowledge that they were in fact worth $200. One day I found them in the store I always happen to see them for only $50!! Needless to say, I bought them. They are the first pair of shoes (over-the-ankle boots actually) that I have not had to put insoles in. The brand is "Footprints". They clearly have thought about what a foot is shaped like.

Re: Walking shoes for conrete floor / workshop

#19

Re: Walking shoes for conrete floor / workshop

Ron Jones

>I really like NB cross trainers. Wear them when ever I can. Hold up well and are comfortable in the shop. My wife wears a custom made ankle brace. Both the doctor that prescribed it and the tech who made it told her to bring a new pair of NB shoes in her size with her when the tech did the final fitting.

Re: Walking shoes for conrete floor / workshop

#20

Custom insoles . . .

Ed Snow

>I have a pair of custom orthotic insoles that a podiatrist laid up for me mostly because I was tired of being tired and sore not because I have any significant foot problems. My insurance completely covered the cost so it was a good investment of my time to have them made.

Not only did they change the way I stand but make any boot more comfortable. Between the change of my posture that they induce and the custom fit my feet never really get sore the best part is they fit in all my shoes but my keens.

From my limited experience the best shoes I have worked in always have a heel and have goodyear full welt construction (the sole is stiched on not glued).