Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

dust collection, will this work?

Posts

dust collection, will this work?

#1

dust collection, will this work?

Tom

>I really hate forgetting to empty my bottom garbage bags. I'm hoping, on way or another, yesterday was the last time I have to do it. The dc is a 2hp, with the custom bag on top, as you can see in the photo. I bought a trash can lid/separator, but I already resent the space it will take up (I haven't even bought the trash can yet). Here's my thought and question... Is there any reason I can just remove the black plastic garbage bags in the photo and put a trash can there (without the separator, of course)? If that is possible, any idea what I could use for a sleeve that would attach to the bottom of the dc ring and the top of the trash can. I figure hose clamps to attach and seal it. I already use a clamp with a lot of duct tape to attach my garbage bags.


img

Re: dust collection, will this work?

#2

What I do......

Barry Irby

>My DC is outside the shop in a closet. I have modified it several times. I had a chip separator I built out of a roll around Rubbermaid trash can, but it took up too much room in the shop (Shedding the small shop tear here) and I was always moving it and dancing around it, so I eliminated it.

Now, I have a trash can (30 gal.?) sitting under the DC and I put a clear trash bag into the can and attach the bag to the DC. The trash can is about four inches short, leaving part of the bag exposed. That gives me a chance to catch the bag as it fills. I can see if the sawdust is too high. (Actually, the bag gets so dusty, I don't trust looking at it and go over and touch it, so your black bags would work about as well.) I detach the bag, fold the top down onto the dust, and use a hand truck to roll it up the the compost pile or out to the curb. I use the bags over and over and just attach them to the DC with the original strap or ring that came with it.

Bought a dented trash can without a lid at Lowes for next to nothing. (Tightwad gene very happy with that.) Handling the bag in the thrash can much easier than the bag alone. This was a significant improvement in the system. One of the modifications was raising the DC to accommodate the can. Now if I just had a really good alarm on it to remind me to change the bag.

Re: dust collection, will this work?

#3

JL

Re: dust collection, will this work?

JL

>I had a 1.5 hp double bagger before I got my cyclone.

There is no reason why you can't put a trash can there - except the awkwardness of removing the trash can and hooking it up. You might lose a little efficiency - but you don't have a felt bag on the bottom, so it won't be much.

I would suggest a heavy duty fabric "sleeve" between the two. If you can have "tunnels" sewn in the top and bottom, you can use the large band clamps to secure it to the trash can and the central portion of the DC.

The trash can separator really does work though. I would empty my trash can about 5 times for every bag dumping.

My $0.02.

Re: dust collection, will this work?

#4

Re: dust collection, will this work?

Mike Fitterling

>You might be looking for this:

Re: dust collection, will this work?

#5

Re: dust collection, will this work?

Mike Fitterling

>Sorry, here is the pic.


img

Re: dust collection, will this work?

#6

Stop teasing...

Tom

>:).... that's exactly what I'm looking for. What is it called, so I can search for it?

Re: dust collection, will this work?

#7

It's Called

Mark Mandell - Gone Round In Jersey

>a 30 gal. galvanized garbage can. You might, however, want to think twice as the sound from such a "drum" can be bothersome. The attached pick of my [Reliant also!] system with blower mounted to masonry wall is an alternative. What you don't see in the view is the plastic liner in the lower cloth bag.

If you're committed to a hard can, find the fiber barrel used by many. They come in various sizes, and you'll find them sold by cyclone marketers like Oneida, Penn State and others. You'll have to fashion a dust-proof cloth/plastic tube with band clamps to make the joint.


img

Re: dust collection, will this work?

#8

Woodworker's Supply *LINK*

LGuthrie - Merrill, Wi

>Dust collector coupling skirt


Woodworker's Supply

Re: dust collection, will this work?

#9

fiber drum # 1  *LINK*

Mark Mandell - Gone Round In Jersey

>


35 gal

Re: dust collection, will this work?

#10

Fiber Drum # 2  *LINK*

Mark Mandell - Gone Round In Jersey

>


drum-2

Re: dust collection, will this work?

#11

Thanks....

Tom

>I spent a long time searching, but always using the word 'sleeve.' Skirt never occurred to me... I guess at that price I can fashion something of my own. At least I know it's feasible. Maybe a thick felt... Thanks again all.

Re: dust collection, will this work?

#12

Re: Think.. *LINK*

Mark Mandell - Gone Round In Jersey

>"Sealed"

Tom,

To make your top filter bag work better, you should have the bottom sealed. This is easy to do by using a heavy plastic bag and a barrel strap clamp. Penn State and others sell 7 mil bags in 10-packs that will fit your bag-holder ring. If you want a rigid container to assist in carrying out the dust, simply use the bag as a can liner.


Bag