My Limbert Tabourette, A Work In Progress (pics)
Jim Shaver - Oakville, Ont
>Well I am working through another project based on an article that Chris Schwarz published in Popular Woodworking some time ago. The table is called a Limbert Tabourette table, it is about 26 inches tall and will serve as a lamp table when done.
The interesting aspect of this table is the simple leg design at allows the rebate joint to secure the piece.
It all begins with some great wood, this is quarter sawn white oak, cut into it�s rough lengths before stock preparation.
Some length adjustments,
Face jointed ,
My next step was to use the PWW article to create templates for the legs and the lower shelf.
Table top glue up, book matching the two halves from the same board.
Using my bandsaw circle guide to cut out the 16� table top.
Final rasping of the cut edges to a finished surface.
The rebate leg joint will tie all four legs together like this
Legs laid out for rough cutting.
Cut out shapes and ready for routed profiling to the template.
I am having fun with this project, it will be a functional table that will stand out on it�s own design merits as well as complimenting a simple fabrication process.
In the years past I learnt a lot by seeing the progress shots of other people's shared projects, I hope in some way this is useful to some of you out there.
I�ll keep you all posted on my work in progress. Thanks for looking in.
Take care,
Jim



















