Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Best spreader clamp?

Posts

Best spreader clamp?

#1

Best spreader clamp?

Ken Platt (Granby, CT)

>Folks -

I'm in the middle of putting down a wood floor (3/4" T&G beech), a job for which I use my spreader clamps a lot to coerce the pieces into tight fits. Unfortunately, two of them have given up the ghost, including one of my much-used, much-loved Jorgensen EZ Hold II's. The other I still have working is a no-name (Great Neck?) which I have no recollection where I got, and which doesn't apply nearly as much force as the Jorgensen.

So I figure I need to pick up a couple more spreaders. I don't use these in the shop as spreaders that much, but sometimes they come in very handy.

What I've liked about the Jorge EZ Holds is the large clamp pad, and how fast you can switch to spreading - you just slip off the non-mechanism side and put it on the other end of the bar, and, as mentioned, the force one can apply. The bar is thicker than that on the quick-grip pistol style.

I've looked in the archives, but can't find any threads discussing the spreader variety of clamps. So, would folks care to weigh in on this? Many thanks -

Ken

Re: Best spreader clamp?

#2

Re: Best spreader clamp?

Glenn Madsen in the SF Bay Area

>Maybe I don't understand those particular names...

I'd use a reversed pipe clamp, with various lengths of available pipe.

Re: Best spreader clamp?

#3

Re: Best spreader clamp?

Sawdust Everywhere!

>You'll want a jet parallel clamp.

The Jorg EZ hold type of clamp will tend to slip after a while.

I like the jet because you can quickly adjust it to a rough size and tighten it down hard if you need to. It has a large clamp surface too.

Re: Best spreader clamp?

#4

Re: Best spreader clamp?

Ken Platt (Granby, CT)

>I've got to admit, reversing a pipe clamp never even occurred to me. I've only got two of those, purchased when I needed a cheap 72" clamp. I had pretty much forgotten I had them.

Next trip to the borg, few short pieces of threaded pipe will follow me home. Cheap and should be all the spreading force I'll ever need. Thank, Glenn.

Ken