Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Wood Movement Question

Posts

Wood Movement Question

#1

Wood Movement Question

Jerry Draper

>I am making an Arts & Craft dining table out of red oak. It has a 12 inch wide stretcher (46" long)that is attached to the bottom end rails with through mortises and tenons. Should I make the mortises oversize to allow for wood movement or size them to fit and glue in place?

Re: Wood Movement Question

#2

Re: Wood Movement Question

brad bransky

>Jerry,

Although currently on hiatus from building mission tables for collectors, I've always made the tenon to slightly rub the mortise edges but not the bottom of the groove to allow movement into the depth of the mortise. If the table will be exposed to extremes, you could make the tenon so there's a tiny bit of space above the tenon so it (the tenon)rests on the bottom of the mortise. Have fun. Don't try to fume red oak. It will come out with a pukey green cast.

Brad in Kansas