Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

OT - daisy-chaining network routers Q

Posts

OT - daisy-chaining network routers Q

#1

OT - daisy-chaining network routers Q

Denis Ch�nard, Orl�ans, Ont.

>I have a wired SMC Barricade that has a print server in it. The office has given me a laptop that has wireless networking capability. So I went out and got a wireless N router that I was thinking of daisy-chaining to the wired router. Is this possible?

I can't get rid of the wired router because I have another computer that depends on the print server. And while I could plug the laptop to the wired router, that kind of defeats the idea of having a laptop...

TIA,

DC

Re: OT - daisy-chaining network routers Q

#2

Re: OT - daisy-chaining network routers Q

Curt Harms

>Google is your friend ;-)

http://www.techspot.com/vb/all/windows/t-30389-Connecting-Two-Routers-Together-One-Wireless-And-One-Wired.html

http://forums.practicallynetworked.com/showthread.php?t=6117

Re: OT - daisy-chaining network routers Q

#3

WAP = Wireless Access Point

Mark Goodall - ATL - tooljunkie

>"...So I went out and got a wireless N router that...."

You should have bought a wireless N access point, which would have made your life easier.

But working with what you've got, and assuming you're wanting to keep your Barricade in place, you certainly can plug your wireless N router into it.

You can plug the wireless N's WAN (internet) port into the Barricade's LAN por, and you'll ahve a network within a network. It will work fine out of the box, however if they use the same subnet mask 192.168.?.? you'll have to change it if you want to be able to access acnything on the outside network from within your inside network. Using the network-in-a-network will work as long as you understand the how networks works to overcome the complexities you may have introduced. I run routers 4 and 5 levels deep sometimes, so 2 levels is workable.

If you're wanting to keep it all on one network, you probably can turn off DHCP on the wireless N router, and then plug the router into the Barricade (not using the WAN port) and your wireless N router will become a wireless accesspoint and you'll have a much simpler single network (not a network-in-a-network). Alternatevely you can probably turn your wireless N router into a wireless access point within it's administraqtion configuriration.

Or if you want the simplest method, with no tricks or new things to learn. return the wireless N router and get a wireless N access point (WAP) instead. It will make you life much easier.

Happy Woodworking!

Re: OT - daisy-chaining network routers Q

#4

Re: OT - daisy-chaining network routers Q *LINK*

John Ballance

>The wireless router, while a tad bit harder to configure, is the lower cost and more flexible option. Comparable pricing shows Netgear N access point at $104 while similar Netgear N 4-port router is priced at $67.99 (both priced as Netgear Rangemax devices at Amazon).

I've got a similar configuration with two 4-port Linksys wireless routers serving as access points inside my home, both downstream from a third Linksys router which serves as the main gateway. The connection couldn't be simpler -- just plug your cable between one port on your main router to port One of the wireless router. That makes the remaining ports on the wireless router, plus the wireless access point, extended ports from the main router.

But before you plug them together, you need to setup the wireless router. The setup requires a couple of steps -- the link below shows how to do the setup for a Linksys router. For other routers, the steps should be similar.

1) change the LAN IP address of the wireless router (make a note of the address you select, as you will need it to to make subsequent accesses the wireless router)

2) change the router operating mode from Gateway to Router

3) set up your wireless security

Then plug the routers together per the note above, and you should be up and running.

You don't need to make any changes to the setup of your main router to effect this cascading -- it will be automatic.

Good luck.


Linksys Help - Cascading routers