Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

New Jet 22-44 Pro Deluxe

Posts

New Jet 22-44 Pro Deluxe

#1

New Jet 22-44 Pro Deluxe

Clint Searl, at the base of Haycock Mtn

>First look:

Ordered via my local WoodCraft store. No price advantage elsewhere and I could pick it up there with no shipping charge.

Delivered to store in less than a week. They put the big 55x44x28 500# box in my pickup.

Broke down the box and hand unloaded all parts except the main assembly. It is very heavy and cumbersome. Hoisted it out strapped to the loader of my Kubota. I would not want to do it by hand, even with a crew of gorillas.

Assembly instructions were complete and clear. It took an hour, or so, to get all together, including legs, casters and I/O tables. Fit and finish were flawless. It's the 230v model and comes without a plug, so I put on a locking type plug for my hookup.

Ran one test board and all seems to be OK. Any fine alignment will wait till the first real job.

Overall, I'm most impressed with all aspects of the experience from ordering through setup and initial use.

Clint

Re: New Jet 22-44 Pro Deluxe

#2

Re: New Jet 22-44 Pro Deluxe

John K Jordan

>Thanks for the note. I bought one a couple of years ago and loaded the box into my storage building with the forks on the tractor to await building my shop (still waiting!). I didn't realize the head was so heavy by itself. I appreciate any comments you have on alignment and use.

BTW, if your Kubota has the skid-steer quick disconnect on the bucket, you can get a set of forks for pretty cheap. They are the second most useful thing I got for my Kubota (3830), just behind the top&tilt.

JK