Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Folly? Sick of pallets - shop hoist

Posts

Folly? Sick of pallets - shop hoist

#1

Folly? Sick of pallets - shop hoist

Peter Gregory

>I spent a few hours, over the last few days, installing a chain hoist in my shop. I realized the ceiling wouldn't support a ton, so I made a frame of 6 X 4's of Doug Fir. Attached the frame around a double door and drove it into the studs with 8" lag bolts. Made the lag holes longer, to allow for wood movement. Strengthen the cross beam with 1/8" steel strips, used in framing, from the home center.

Just moved my whole shop cross country on pallets, last year. I'm sick of dealing with pulleys and levers, to get things on or off a pallet. Now everything in my shop can be picked up with a pallet jack or is on a mobile base. Solves that problem.

Pulling my drum sander off its pallet and installing it on a mobile base took less than 5 minutes. I wish I had built this last year, would have saved me some time and pain.

Hopefully, the picture upload will work. Never done it before. :)


img

Re: Folly? Sick of pallets - shop hoist

#2

Re: Folly? Sick of pallets - shop hoist

Dan Donaldson

>Looks nice. The picture upload worked fine for you. It would help a bit if the picture was a little bigger. A good size for posting is to have the horizontal dimension around 600 to 650 pixels. This fits on most screens and is big enough to see detail. If you have problems getting it this size and still be a small enough file size to post, send me the original and I will fix it for you. (and tell you what I did)

Re: Folly? Sick of pallets - shop hoist

#3

Re: Folly? Sick of pallets - shop hoist

Peter Gregory

>Thanks, on my webpage, we use a open source program that correctly sizes pictures. A better way to play.