Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

What is the hardest thing for you to do?

Posts

What is the hardest thing for you to do?

#1

Steven Antonucci

What is the hardest thing for you to do?

steve antonucci

>Everyone here that turns knows that there is one thing (or maybe more) that they "just cannot do". For a long while for me, it was cut from left to right with a skew, but I seem to have conquered that now.

My current challenge is cutting multiple, consecutive beads all the same shape and size. I can roll a bead with a spindle gouge or a skew, cutting cleanly and efficiently. I mark all of the beads diameters carefully. I cut.

Some are fat, some are thin. Even though I carefully mark out widths, carefully cut downhill, I have yet to figure out the magic required to make a series of beads all look the same size.

So what's your biggest challenge?

Steven

Re: What is the hardest thing for you to do?

#2

Steven Antonucci

Meant for Main Board ;-), but still applies here!

steve antonucci

>

Re: What is the hardest thing for you to do?

#3

Lee Gordon

Re: What is the hardest thing for you to do?

Lee Gordon

>I have only two:

Starting

Completing

Re: What is the hardest thing for you to do?

#4

Re: What is the hardest thing for you to do?

Sawdust Everywhere!

>Hardest thing:

eat humble pie...

say I'm wrong....

Say I'm sorry....

Re: What is the hardest thing for you to do?

#5

Re: What is the hardest thing for you to do?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Steve,

Putting on my socks and shoes is the most difficult task. Arthritis coupled with compression stockings makes it difficult. When SWMBO does it, she tickles my feet beyond control. Its funny to all who watch. Not funny to me.

George

Re: What is the hardest thing for you to do?

#6

Re: What is the hardest thing for you to do?

Fred Davis

>Making a mistake look like a design feature has gotta be up there ;-))

FredD

Re: What is the hardest thing for you to do?

#7

JL

Re: Finishing a piece...

JL

>If it is going to a customer, no problem - I get the finish on as soon as I can. If it's for me? I've got some pieces that are a few years old that I still don't have any finish on.

Re: What is the hardest thing for you to do?

#8

Dale Lenz

Re: I'm half way with Lee, on this one.

Dale Lenz

>Prying myself off of dead center and get going.

Re: What is the hardest thing for you to do?

#9

Re: What is the hardest thing for you to do?

Jim in Houston

>Getting started is the hardest part for me. It's all downhill from there. My wife likes to say that my starter's all the time broken.

Re: What is the hardest thing for you to do?

#10

Re: What is the hardest thing for you to do?

Thomas Skaggs, Foothills of Mount Level

>Making the piece can be hard at times for me. But the hardest part is pricing it when it's done!

Tom

Re: What is the hardest thing for you to do?

#11

Dale Lenz

Re: What is the hardest thing for you to do?

Dale Lenz

>But to answer you question, it's sanding/rubbing out a finish with out sanding/rubbing through. I've learned not to rush the curing time, helps! But, I'm still on needle and pins doing my last sanding of the finish. Have rubbed through with the rubbing compound a few times.

Re: What is the hardest thing for you to do?

#12

Using a curved-bottom spokeshave

Brian in Sandusky, OH

>

Re: What is the hardest thing for you to do?

#13

Re: That is it!

Peter Gregory

>Wish I was better.