Cutting 6x6 treated lumber
John Halstead
>I am having trouble cutting 6x6 treated lumber that is stil damp in the center. My hand held power saw with a combination saw blade will not do the job.
Knowledge You Can Build On — Est. 1998
Cutting 6x6 treated lumber
John Halstead
>I am having trouble cutting 6x6 treated lumber that is stil damp in the center. My hand held power saw with a combination saw blade will not do the job.
Re: Cutting 6x6 treated lumber
Dale Lenz
>Are you trying to make the cut in one pass? If so, make several passes of say 1" deep per cut, flipping the cant over every cut.
Re: Cutting 6x6 treated lumber
Rob Stokes in North Vancouver
>Sounds like a perfectly good excuse to buy a worm drive :)
Rob
Re: Or a husky, : ' >
Dale Lenz
>
Re: Cutting 6x6 treated lumber
Barry Irby
>Use a sharp thin kerf blade. Square all the way around the timber and cut from all four sides. Still might be about a 3/4" square in the center to cut with a hand saw.
I have an old B&D Sawcat and it will do it. Perhaps your saw doesn't use enough amps. If you have a lot to do, it might be time to upgrade to a really heavy duty saw. Can't think of a real good reason to resent having too much power. Too little is a different matter.
If the cuts don't have to be too pretty, a small electric chain saw will handle them quite nicely. Another nice tool to own. (about a hundred bucks)
Re: Cutting 6x6 treated lumber
Glenn Madsen in the SF Bay Area
>And if there aren't too many to cut, and money is a concern, a sharp crosscut Disston will be useful as well.
I LIKE the chainsaw idea, though.
Bow/Swede saw another option
Bill Howatt
>
(snicker-snicker !)
steve mackay
>
Good thought.
Barry Irby
>I had one when I was a kid that would have made short work of them. It must have been made in America or maybe Sweden and it cut like crazy. The ones I have tried lately were cheep poor quality knock offs and were not worth owning. So if you try this route look around for a better quality one.
Sawzall another option
howard
>