Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Powermatic Purchase

Posts

Powermatic Purchase

#1

Powermatic Purchase

DWA

>I'm about to Purchase a new Powermatic 2000 Table Saw. and I was wondering what some of your suggestions would be for a internet dealer/retailer.

Currently I'm leaning heavily to the Amazon side. I've puchased a few tools through them and was pleased and then there is the whole free shipping part too.

However, I'm very open and willing to accept other suggestions.

Thank you,

Dwain

Re: Powermatic Purchase

#2

Re: Powermatic Purchase

Fred Davis

>Well NicePerson,

Amazon.com is a good source and I have never had a problem with them.

I buy books and some tools from them, like a Bosch jig saw I give to the high school shop teacher to pass on to the best student in his class every year.

Great deal on free shipping , you might want to take the offer from to a local Powermatic dealer , just incase he would match it and install it for you . that would make everybody happy.

Since Amazon.com uses vendors all over the place , it could be one in your area.

FredD

Re: Powermatic Purchase

#3

Re: Powermatic Purchase

Scott in Montana

>I've purchased many tools through Amazon over the years and have always been very happy with the service I have received.

Yesterday I received a Bosch router from Amazon. It was damaged, not badly and I could have repaired it, but after all it was new. I went on line and clicked the return tab; within 90 seconds I was printing out a prepaid shipping label to send it back. Within the next forty-five minutes I received an e-mail telling me that my replacement had been shipped. Just amazing!

I don't get this good of service from my local tool mongers.

BTW I purchased my Powermatic 66 from Tool Crib before they were purchased by Amazon.

Enjoy your saw!

Scott in Montana.

Re: Powermatic Purchase

#4

Re: Powermatic Purchase

Tony - Memphis

>I've been thinking about buying a PM 2000 myself. Looks like they all ship from the factory, so I'm not sure it is really all that important who you buy it from. I'd still be leary of some company I had never heard of, but I would assume any of the big name dealers would be safe. My big issue is how to get it off the truck and into my shop. Oh, and adding a new 220 outlet. Details. Enjoy your new saw. LEt us know how it goes.

Tony

Re: Powermatic Purchase

#5

Re: Powermatic Purchase

Dwain

>I really appreciate the time you've taken to answer my question. I sounds as though I was on the right path but I'll keep investigating since it will probably be about a month before I finally make the purchase.

Thanks again,

Dwain

Re: Powermatic Purchase

#6

Re: Powermatic Purchase

Jim Dillon

>Dwain,

I've purchased a drill press, planer, mortiser, mini-lathe, band saw, portable shop vac and loads of smaller tools from Amazon/Tool Crib over the past 10 years and only had one problem with a small dent in the lathe, but it was easily fixed. I recommend them. I'm sure something as large as a tablesaw would be very well crated and likely on a pallet. But be sure to check around from a local supplier as well as they might be willing to strike a good deal. However, it sure is hard to beat the free shipping and generally no sales tax from Amazon. Good luck.

Jim

Re: Powermatic Purchase

#7

JL

Re: Powermatic Purchase *LINK*

JL

>I have made a number of major tool purchases from Redmond Machinery. But I usually have gone by the store to pick things up (even if it meant a 200+ mile round trip). They do have an online store and a web presence.

As many of the online purchases will ship directly from the manufacturer, I don't know if it really makes a difference who you buy them from - except for things like tax and shipping. The service also makes a difference. If you are happy with Amazon, go for it.


Redmond Cabinet Saws

Re: Powermatic Purchase

#8

Re: Powermatic Purchase

Dennis Yoder

>Check out Tool Nut. I had nothing but good experiences with them and they say they will beat everybodies price. Dennis Y

Re: Powermatic Purchase

#9

Re: Powermatic Purchase

Dwain

>Has anyone heard of Tools-Plus.com they are one of the sites that come up on the Powermatic site as on line dealers they recomend. I just thought I'd ask to hear what you had to say.

Thanks,

Dwain

Re: Powermatic Purchase

#10

One More Question

Dwain

>Has anyone heard of Tools-Plus.com they are one of the sites that come up on the Powermatic site as on line dealers they recomend. I just thought I'd ask to hear what you had to say.

Thanks,

Dwain

Re: Powermatic Purchase

#11

Re: Powermatic Purchase

larry in kansas

>DWA What ever you do try to go through this site to buy whatever you but. Like if you do but from Amazon, go to their ad logo and click on it, and that will take you to their site. I guess that woodcentral gets something out of your purchase. Good Luck with your purchase. Larry

Re: Powermatic Purchase

#12

Tools Plus

Scott in Montana

>Living here in Montana, tool mongers are generally a long drive away. If I had a good local dealer, I'd support them. Anyhow, I also frequently order from Tools Plus. Their $6.50 freight policy and competitive pricing makes them one of my favorites. Nice people.

Scott in Montana