Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

1st "real" project (be gentle! ;-)

Posts

1st "real" project (be gentle! ;-)

#1

1st "real" project (be gentle! ;-)

Dan Mitchell

>I recently completed a small "Shaker style end table", my first "real" project. The table is made from 1" x 3" cedar boards I recovered from a hot tub I removed from our new house. The top image is the table, it's about 23" high, has tapered legs and a top a little over 12" square, below that is a shot of the top itself.

This was mostly a "practice" piece to get some experience with various techniques before moving on to REAL wood (mortise & tenon joinery, top and leg glue-ups, tapering the legs, finishing, etc.) but I'm pretty happy with how it came out.

After planing, the cedar is actually quite pretty, I think, even with the nail holes visible on the finished piece, with quite a range of colors, etc., but it's SO SOFT. You can easily scratch it with a finger nail, a couple penciled layout lines on the legs were so deep I couldn't sand them out completely w/o distorting the profile.

After this, my plan is to make a larger table of the same design, but longer, like a hall or sofa table, preferably out of cherry.

Thanks for looking.

Dan


img

Re: 1st "real" project (be gentle! ;-)

#2

Source wood

Dan Mitchell

>Here's an example of the cedar from the hot tub which I used for the table, before planing/jointing:


img

Re: 1st "real" project (be gentle! ;-)

#3

Don't know if Ol' Norm . . .

steve mackay

>could do better than that ! Looks VERY nice from this end !

Re: 1st "real" project (be gentle! ;-)

#4

No greater praise...

Dan Mitchell

>Wow, NORM! ;-)

If I recall correctly, he did a bedside table a bit like this, but his had a drawer.

Guess I'll just have to get a dovetailing jig!

Thanks for the reply Steve.

Dan

Re: 1st "real" project (be gentle! ;-)

#5

Re: 1st "real" project (be gentle! ;-)

Jim Dillon

>Dan,

Sure doesn't look like a "practice" piece to me at all. If you are planning to move on to a larger Shaker-style table in cherry, you might want to look at the DVD by Kelly Mehler called "Build a Shaker Table". It is quite good and I found it very helpful when starting out - not that I've progressed much since then though 8-). Yes, soft woods like cedar, cypress, pine etc. have their own set of problems to deal with. Thanks for posting and we look forward to seeing that larger table!

Jim

Re: 1st "real" project (be gentle! ;-)

#6

You're not going to believe this...

Dan Mitchell

>But I just picked that video up at the library last night (along with NINE OTHER Taunton vids) and I'm watching it right now. No kidding!

Thanks for the comments!

Dan


img

Re: 1st "real" project (be gentle! ;-)

#7

Nice practice piece and ?

Eddie Pacheco; San Jose, Ca.

>How did you get to set up a nicely equipped shop and this be only your first piece? I had to explain almost every tool need, and show proof of usage, to my wife. Not fair...:-)

Re: 1st "real" project (be gentle! ;-)

#8

Oh, that's easy...

Dan Mitchell

>I just keep saying, "Honey, after I get (fill in the blank) I'll be able to make that (blank #2) you've been wanting." I figure this should begin feeding on itself. For example, after I made this little table, she said "Two of these would make great night stands, could you make them with a drawer?"

Helllooooo dovetailing jig ;-)

Plus, I've been doing a lot of work on the house we just got, so I talk-up how helpful the tools are for that.

What? You didn't know how essential a lunch box planer is for installing miniblinds??? ;-/

Dan

Re: 1st "real" project (be gentle! ;-)

#9

looks great

Bill Tindall, E.TN

>far better than the first things I made. You have talent!

Re: 1st "real" project (be gentle! ;-)

#10

Thanks Bill!

Dan Mitchell

>

Re: 1st "real" project (be gentle! ;-)

#11

Re: 1st "real" project (be gentle! ;-)

Ralph Turney

>Very nice table...and nice tools!

Ralph

Re: 1st "real" project (be gentle! ;-)

#12

Re: 1st "real" project (be gentle! ;-)

Bob Entwisle in NJ

>Nice work, Dan!

And I like the luchbox planer mini blind technique too!

Bob

Re: 1st "real" project (be gentle! ;-)

#13

Re: Oh, that's easy...

Dave Pashley

>Great job Dan! However I'm sure if I laid that planer/miniblind line on my lovely SWMBO I would dream that I was being fed toes first into said lunchbox planer and then wakeup to find it wasn't a dream! Good line though.

Dave

Re: 1st "real" project (be gentle! ;-)

#14

Re: 1st "real" project (be gentle! ;-)

Fred Davis

>Dan,

I wish I could say my first, second and third projects had that level of skill , you must be pulling our collectives legs. ;-))

FredD

Re: 1st "real" project (be gentle! ;-)

#15

Nice Work!

howard

>

Re: 1st "real" project (be gentle! ;-)

#16

Re: 1st "real" project (be gentle! ;-)

Thomas Skaggs, Foothills of Mount Level

>Dan,

Well done. My very first project was a Shaker style coffee table of similar design. It's a good choice for cutting your woodworking teeth. Keep up the good work!

Tom

Re: 1st "real" project (be gentle! ;-)

#17

Re: Oh, that's easy... *LINK*

Andy Lincoln,in Dearborn,MI

>Dan,

If you go back in the Popular Woodworking archives there is a very simple shop built jig for dovetails by Troy Sexton. I used it when I made two Shaker style tables based on the article/drawings in PWW's sister publication Woodworking Magazine.For doing small drawer work it was fantastic and wasn't complicated,nor needing several test boards/set-ups.You can then take the money saved on the jig and buy more wood.

Andy


Troy Sexton's $19.99 DT Jig

Re: 1st "real" project (be gentle! ;-)

#18

Dovetail jig ? . . .

steve mackay

>Heck yes, now you REALLY need one ! Think of all the wonderfull NEW, better & nicer things you could make for the house ! In fact saturday would be none to soon to pick one up.

Re: 1st "real" project (be gentle! ;-)

#19

Thanks for all the great responses

Dan Mitchell

>Although this is my 1st "real" project, I did have a Unisaw & Delta 6" jointer previous to my current setup. I got them shortly before moving about 3 years ago and sold them on Ebay, but I never really used the jointer at all (warped fence, for 1 thing), & used the TS mostly for renovations on my old house. No "real" woodworking. I have always had/used a lot of tools though, used to really be into working on cars, plus even though I wasn't doing any woodworking, I always caught "Norm" and any other woodworking related content I could find, both of which I think helped.

Dan

Re: 1st "real" project (be gentle! ;-)

#20

Only one problem...

Dan Mitchell

>The technique requires a bandsaw, which I lack at the moment.

Problem?!? What was I thinking?

"OF COURSE I can make you those nightstands dear, just need one more little piece of equipment... "

I understand the Rikon's nice... ;-)