Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Value of old lumber? (OT)

Posts

Value of old lumber? (OT)

#1

Value of old lumber? (OT)

Barry Irby

>I'm working on an old house for my cousin. Part of it was built in the 18oo's and part about fifty years ago. In the lower part, someone had lowered the ceiling about two feet with rough sawn 2x8's fourteen feet long. They are pretty much full dimension. Some one told here they were "very valuable" and that she could sell them for a handsome profit. I am scepticle. They are yellow pine and about No 2 grade. They were shown with a circular saw. I do not believe they were original to the older part of the house. I see them as nothing special and we should use them in the renovation.

Anyone got insight into their value?

Re: Value of old lumber? (OT)

#2

Re: Value of old lumber? (OT)

George Koch

>Barry, The first indication of their age should be the method of installation. Were they nailed in place with common wire nails, hand forged nails, or let into frame with M/T and pegs. If nailed in, I would suspect they were just local cut lumber, not milled and installed at a later renovation. Just my 2 cents! George

Re: Value of old lumber? (OT)

#3

Re: Value of old lumber? (OT)

Barry Irby

>They were Nailed on place with 20d wire nails on one end and just sitting on a ledger loosely on the other end.

The nails in this house have been a curse. They used full 16 and 20d nails with reckless abandon. They occasionally threw in a few case hardened cut nails for good measure. Many studs had four 16d toe nails in the bottom. My usual demo method is to cut under the studs with my Sawzall and a bimetal hack saw blade. With modern nails (actually 12d) and only two per stud, its like a light saber. Not so much here. And, a hack saw blade will cut a case hardened Nial, but only one.

Re: Value of old lumber? (OT)

#4

Re: Value of old lumber? (OT)

Thomas Skaggs, Foothills of Mount Level

>That lumber probably doesn't carry great value in a monetary sense. But for re-use it is worth something. Older construction materials are often superior to new. The growth rings and desity are better because likely it came from older growth timber. Plus it is now fully dry. You can't buy 2X material at the big boxes like that.

Salvage what you can for re-use. Any time I cut out old studs in my house I always save them for re-use.

Tom

Re: Value of old lumber? (OT)

#5

Last I heard . . .

steve mackay

>yellow pine was extinct although they are cloning it now. My folks have all yellow pine molding in their house and its 'bout impossible to match. Get this stuff in front of the right person and it might fetch a VERY nice price !

Re: Value of old lumber? (OT)

#6

Re: Value of old lumber? (OT)

Justin

>I found an old YP 4x4 in a renovation years ago & was living in a place heated by a woodstove. It burned like coal. Othe rthan that, there is the cachet of old wood, wood salvaged from an interesting place. Mostly folks want the real nice white pine that has aged, or the hardwoods. Other than that, old YP isn't that valuable marketwise.

Peace

Justin