Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Wine Cellar *LINK*

Posts

Wine Cellar *LINK*

#1

Wine Cellar *LINK*

HC Sakman

>As a "break" from making wine cabinets, this time I ended up in a cellar job. All those bottle holders are mortised to the side walls of each section. (total 7 of them, 3 left, 3 right and the wider end unit.)

I used the nice curly qswo for the end unit, and each piece is alternationg, thus creating a herringbone effect.












































That little carving (2'x1') is done by a CNC. Ceiling light fixture is a 4 sided compound mitered box, like a roof of a house, except it doesn't come to a point, it comes to a flat board which is bookmatched "perfect" qswo boards.

Spaces (gaps) in between the drawers are intentionally wide for the cool air flow, which comes from the cooling unit behind the verical grill. Cooling unit is accessed from the other side of the wall.

This is a very difficult place to photograph. So, if something doesn't make sense just ask please.

All in all if was painful as I find most built-in jobs are.

All finished with wipe on poly.

Thanks,

Chico...


My website

Re: Wine Cellar *LINK*

#2

Re: Wine Cellar

David Yoho

>Chico, once again you've demonstrated your skill as a fine craftsman in this work. However, I think this project again reminds me of your great sense of design. For me, little touches, like using the grain or figure of the wood, is what takes a project to a higher level.

Simply using "wood that speaks to you" (figured) is not always all we can do as furniture makers to achieve the best effect. What I'm reminded of here is when you use the figure as a design element, it "speaks" even louder!

Nice work, Chico, and thanks for sharing it. I always seem to learn something whenever you post.

David

Re: Wine Cellar *LINK*

#3

Ellis Walentine

A few questions

Ellis Walentine

>Wow, Chico. Very nicely done.

1. What was the initial chain of events? E.g., did the client approach you with an open invitation to design this wine room, or did they already have a plan in mind (or in hand, from an architect or designer)?

2. Where's the library ladder that slides along those top rails? And did you turn the rails or shape them?

3. What was your process for getting that carving design into a CNC router program, and how much did it cost you to have them carve it for you?

4. Did you buy the oak plywood for the "x"-shaped lower racks or did you lay it up with veneers?

Inquiring minds want to know.

Ellis

Re: Wine Cellar *LINK*

#4

Spectacular!

Joanne Adler in Pt. Pleasant, PA

>So's the wine collection, I'm sure. I love the lines of the room. It has a very "grand" feeling.

I'm curious as to what qualifies a bottle for a berth in a cushy drawer, as opposed to on an open rack. Are those extra special bottles? Extra expensive bottles? Or is that just "overflow" space?

Re: Wine Cellar *LINK*

#5

Re: Spectacular!

George@Colonel's Workshop-Havertown PA

>HI jOANNE,

Its too beautiful to wine about if you are having a true spiritual experience. Hi to Fred.

George

Re: Wine Cellar *LINK*

#6

I've always wondered,.

Eddie Pacheco; San Jose, Ca.

>What it would be like to be INSIDE one of your pieces of furniture....Now I know.

Jeepers, Chico! That is/has to be about the nicest wine cellar around. I've seen others on the net, but the craftsmanship and attention to wood selection and grain orientation was not their strong point. Uh, um, did Steve Ballmer pay you well for this?...:-)

Re: Wine Cellar *LINK*

#7

A few "delayed" answers w/ NEW PIX...!

HC Sakman

>1. What was the initial chain of events? E.g., did the client approach you with an open invitation to design this wine room, or did they already have a plan in mind (or in hand, from an architect or designer)?

It happened with a mutual friend who connected us. There was just an empty room. He was planning to get one of those typical wine cellar outfits which all do exactly the same thing(design). When he met, he was anticipating something different and that's what he got. It's all my own design.

2. Where's the library ladder that slides along those top rails? And did you turn the rails or shape them?

See the new pictures... ;-)

3. What was your process for getting that carving design into a CNC router program, and how much did it cost you to have them carve it for you?

Cost was $400 and I just drew and he scanned it than cut by CNC. It took 6 hours. I got a price break on this.



Photobucket - Video and Image Hosting



Photobucket - Video and Image Hosting



Photobucket - Video and Image Hosting



Photobucket - Video and Image Hosting




4. Did you buy the oak plywood for the "x"-shaped lower

I was lucky to find some gorgeous Class A1 qswo MDF core sheets. I just edged them with solid qswo.

Thanks Ellis.

Chico...

Re: Wine Cellar *LINK*

#8

Thank you David.

HC Sakman

>

Re: Wine Cellar *LINK*

#9

Re: Spectacular!

HC Sakman

>Thanks Joanne.

Actually I thought about the drawers since the cooling unit is right behind it. The case is back and left side have wide openings and that's why the gaps in between the drawers are oversize, to allow cool air flow. It's set at 58F, but we figured the drawers will be cooler than the rest of the room, so he keeps his white and dessert wines there. The rest of the shelves have all red wine.

There's also a proper wine cooler under his kitchen island.

Chico...

Re: Wine Cellar *LINK*

#10

Addendum

HC Sakman

>Hi Again Ellis,

I skipped one question.

Rails are 1-1/2" in diameter and I shaped them with 3/4" radius roundover bit & concave spokeshaves.

Chico...

Re: Wine Cellar *LINK*

#11

Re: A few "delayed" answers w/ NEW PIX...!

Jim Shaver - Oakville, Ont

>Amazing work my good friend....all your pieces look excellent, I love the wine cellar.

Take care,

Jim

Re: Wine Cellar *LINK*

#12

Hey Eddie...!

HC Sakman

>Thank you very much for your kind words Eddie.

Who's Steve Ballmer?

Chico...

Re: Wine Cellar *LINK*

#13

Thanks Jim.

HC Sakman

>

Re: Wine Cellar *LINK*

#15

Yeah, Chico,

Eddie Pacheco; San Jose, Ca.

>I figured it has to be some corporate top dogs that are, or should be, buying your furniture pieces. You create some great wood work.