Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

yet more turnk questions

Posts

yet more turnk questions

#1

yet more turnk questions

Bill Tindall, E.TN

>Consulting my limited library I find that what I am going to make is called a "domed trunk" . They seem to be something from the early 18th century. There are pictures of some examples in Pain, The Heritage of Upper Canadian Furniture, however none of the pictures shows detail of the joinery for the curved lid.

Should someone encounter one of these where a picture could be taken I would be most grateful to have a picture showing detail of a front corner showing how the dome, lid sides and trunk sides come together.

Lacking guidance from an original I am going to assume the sides of the lid are dovetailed like the trunk body. How the dome attaches to the lid sides is unclear. I could go rustic and nail it on with attractive-headed nails.

Re: yet more turnk questions

#2

Re: yet more turnk questions

Keith Newton, LR, Arkansas------WebKitFormBoundary

>I don't think I would DT the top to the lid ends without having the grain running vertical in the ends. and I am not sure I would do that.

If the rest of the box is DT on the sides, I would consider doing the top sides the same, and maybe have the whole top either overlay both sides and ends, or fit into a dado on both. I would do the later.

Sounds like a fun project, good luck.