Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

OT - Speaking of Window Wells

Posts

OT - Speaking of Window Wells

#1

Lee Gordon

OT - Speaking of Window Wells

Lee Gordon

>Rather than hijack the thread about basement window wells, I'm starting a new thread to ask about window well covers. It appears the borgs carry them in two standard sizes. But I find it hard to believe those are the only two sizes they come in. I have a couple of window wells for which the standard sizes aren't quite right. Besides the Borgs, I've tried a couple of "real" lumber yards and they don't seem to have them either. So my question is, where might I find window well covers that are slightly wider or deeper (or even shallower) than the standard sized ones? A masonry supplier? Some other specialty building products dealer?

Re: OT - Speaking of Window Wells

#2

Ellis Walentine

Not much help, but...

Ellis Walentine

>... what about replacing your existing wells with ones that are standard sized? It shouldn't be a very involved or expensive job.

I can't imagine that any manufacturer or retailer attempts to stock every possible size of cover.

Ellis

Re: OT - Speaking of Window Wells

#3

Re: Not much help, but...

Alan in Little Washington (NC)

>Speaking of window well covers- has anyone tried to use the plastic bubble-shaped ones for a mitersaw dust shroud/deflector? Looks like it might work really well.

Re: OT - Speaking of Window Wells

#4

Re: OT - Speaking of Window Wells

Robert R Clough - Thorncraft

>Lee, if your wells are more than 30 YO (or so my son tells me) you may well (pun intended) have what today is non standard. From what I remember as a boy, and that is closer to 60 years ago, window wells seldom had covers.

I'd have to say that your best bet is probably custom covers or replace the wells. If they're corrugated metal that should not be too hard. But I've seen some houses with brick wells.