Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E. Peacock

>9 Jun 2008

Good Morning!

Well, the summer heat has arrived as well as the humidity. One of my window A/C units went out last September and that leaves me with one A/C unit for my shop. Needless to say that that will not be enough to get the 110�F + temperatures down in my shop to be able to work in it. That's one problem I have with a metal building for a shop....it's like an over (even with insualtion). I'm trying to get me sleep schedule shifted a bit so I can get in the shop "early" in the morning and work while it is cooler, but my day job seems to keep me late in the evenings most nights on the days I work.

I've been playing bass at our church almost every Sunday since we moved to our new building. I'll have to get some pictures and post a few one day.

The other commitment is with the family on our "family garden". It's doing really nicely. All the radishes are done now, onions are coming in and banana pepper is getting picked.

I sold my 18 year old son my 2002 Sentra because he needed a car (that I didn't have to keep fixing) and I bought a cheaper mode of transportation. I bought a 2007 Honda Shadow VT750 Sprirt (shaft drive). Really nice bike and yes, I have all the necessary safety gear and will be taking the motorcycle safety course this coming Saturday. This is bike #18 for me as I've been riding motorcycle since I was 6 years old and my 1st bike was a Honda MiniTrail 50. I stopped riding when I was leaving the military, then I got married. Now, 27 years later? I getting back on a bike, but I need training for highway riding as most of my riding before was dirt.

So what did YOU do this weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments....

#2

Ah, To Be In Its Bonnet...

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis,

More progress on the clock to report. We have completed the attachments of the "S" moldings and have turned the columns. We are installing them this week following sanding. Charlie will be taking the bonnet home so he can sand and feather/blend everything together beforer we finish. We are considering potassium dichromate, as well as various cherry recepies. I hope Ellis notes the finial on the clock's crest.

Otherwise, I shellaced the double dresser after exposing it to days of strong sunlight. I got exactly what I wanted in terms of color. Unfortunately, the weather has turned much too humid and hot to do much more finish work at present. Some of the drawers have swollen in the hiigh humidity, so I can plane them slightly today to ease and relieve the binding.

In the midst of all this I began fabrication of a mirror frame, one of two, for the master bedroom suite. Not too proud of the effort. A few mistakes were made while my mind vacationed elsewhere. Still, it looks ok and will fit the mirror.

Also went to a wedding Saturday evening and had a great time. Sunday was a BBQ with 5 of my kids and 4 grandkids, plenty of cold beer and lots of laughs. It was a great weekend, and I hope your next week, Dennis, is just as much fun.

George


img

Re: WC Weekend Accomplishments....

#3

Hey Colonel.....

Thomas Skaggs, Foothills of Mount Level

>When building a period clock one must have a clock face that is in keeping with the period. From the photo it appears that you have succeeded! ;-)

Tommy

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

David Yoho

>I've been working on a number of projects, as time permitted, in my shop since late March. These shots are of two recent commissions. The blanket chest, my second, was delivered last weekend and the small table will be completed soon.

This tiger maple blanket chest is almost identical to the first one I posted here earlier but to reduce the cost a little I used standard brass butt hinges from Horton Brasses rather than the black iron 12" strap hinges. I like the black iron hinges better and have found another source that makes them by hand to order for less money. The other real difference between this one and the previous one is the color. I was going for a little more of a red tone, which ended up matching the customer's bedroom furniture very well.






The butt hinges from Horton were perfect and very easy to install. It's nice working with quality hardware!






Here's a detailed shot of an ogee bracket foot and how nice the figure looked.






And finally, here's a shot of the little table I've been working on since the weekend. The top is a piece of figured cherry I ordered from Hearne Hardwoods and the base is mahogany from one solid timber I purchased locally. I think the mahogany should have some ribbon stripe in it, which should show itself better with a finish. This is the first time for tapered legs. Nothing to it once you figure the angle!! The table is dry-fitted in this shot to make sure the mortise and tenons fit. I plan to peg the tenons from behind and there's some inlay work I need to do before final sanding and finishing.






Re: WC Weekend Accomplishments....

#5

Ceiling

Mike Fitterling

>Got about 40% of the ceiling installed on our back porch/family room. I want to get this finished before I have to turn my attention to the addition. They are setting up block for the stem wall for that now.


img

Re: WC Weekend Accomplishments....

#6

Alan Young

Beautiful....just beautiful....But

Alan Young

>I could see that wonderful floor better if that other "thing" wasn't in the way :^)))


Great job David!!!

Alan

Re: WC Weekend Accomplishments....

#7

Re: Hey Colonel.....

Ken Oakley-Sunny St. Cloud, Fla

>I seem to remember hearing about a face that could stop a clock--------

Re: WC Weekend Accomplishments....

#8

Really nice!

Tony - Memphis

>Wow, that looks great. I like Horton's stuff too. I used it on my last project and was real happy with it/them. Your joinery is impressive. You'll notice I never post closeups of mine!

What finish/procedure did you use on the chest? It looks really nice.

Tony

Re: WC Weekend Accomplishments....

#9

Re: Really nice!

David Yoho

>Thanks, Tony.

Here are the basic steps I use. The finish starts with a trace coat of WD Lockwood water based dyes (in this case, a mix of brown amber and mahogany) applied before assembly but after initial sanding at 80 - 100 grit. The trace coat does two things for the figured maple. It gives the stripe some initial color, which will help it to "pop" later and it shows any glue spots I might have missed and sanding scratches I need to remove.

After sanding to 150 grit to remove the trace coat on the surface, any glue, and sanding scratches, I apply the final color of Lockwood dye (red mahogany). Once dry, I wiped on medium sheen Waterlox. Start by flooding it on, keep working it in places that suck up the finish to let it absorb as much as possible, and wipe off any excess. I do this for the first two coats and then apply about four more lighter coats, wiping away a little less excess each time. The Waterlox adds an amber color to the mix and brings it around to what you see in the shots.

Re: WC Weekend Accomplishments....

#10

Re: WC Weekend Accomplishments....

Fred Davis

>David ,

A excellant job with a difficult wood to work with. The finish is on a par with the workmanship and that is unusal in this day and age.

FredD

Re: WC Weekend Accomplishments....

#11

Thanks

Tony - Memphis

>I need to try that Waterlox. I've read a lot of good things about it.

Tony