>Yeah, well I remember the days when auto makers made one body style car or truck for over 10 years also. For some reason they feel they need to change it all every year. Seems like a unecessary and costly thing to do, and in some cases they take what was a good looking design and make it ugly. Sorry but I don't buy into all this oil crisses B.S. Just another excuse for the big oil companies to screw us all.
One important reason that BWM (and others) didn't bring their diesel models over here for years was that their vehicles were unable to run on our crappy diesel while meeting emission requirements.
For years diesel in Europe was much higher quality than in North America. In particular, the sulphur content was orders of magnitude higher (ie 5000 or 500 ppm here vs 50 to <10 ppm in Europe). This high sulphur content fouled up emission control systems on modern diesel engines. The cetane rating (comparable to octane rating for gas fired engines) was also dismal in North America - we suffer with 40 cetane diesel while Europe has 50 to 55 cetane. That's analagous to running your gasoline engine on 65 octane fuel!
The reasons for this state of affairs rest solely on our legislators. They let themselves be convinced by the refining and trucking lobbies that it was too expensive or impossible to do what Europe was already doing. They delayed and delayed regulations to improve diesel fuel quality until the car manufacturing lobby finally made more sense than the refining lobby.
No doubt there was a cost to improve fuel quality. But it was not impossible. We now have better quality diesel - not at European levels yet, but better - and automakers are now bringing more high speed diesels into North America. These vehicles are beautiful to drive. Last time I was in Germany we (three of us) rented a full size VW Phaeton with a 3.0L diesel engine. What a beauty - full size car, bombing down the Autobahn at 218 km/h (by GPS) loaded down with three engineers and all their gear, AND getting 45 mpg with no smoke/particulate, miniscule HC and CO emissions, and very low NOx emissions.
Part of the costs required to improve diesel fuel are now reflected in the higher diesel prices than we were used to in the past. I'd estimate that 5 cents per litre (20 cents per gallon) of increased cost is due to improving the quality of diesel fuel. The remainder of the recent costs are due to speculators driving up the price of crude oil.
Cheers,
GolfSteve
1999 VW Golf, 1.9L Turbo Direct Injection; 195,000 km
Needing a timing belt change, new water pump, and repairs to coolant leaks...$2000 about to disappear out of my pocket soon. Of course, the glove box is broken, the heated seats are broken, all the brake fittings are rusted in place, the skid plate is busted up, the block heater is dead, the side mirrors are de-mirroring again, the rear view mirror is busted.
And I put up with all this just to get 50 mpg and a nice smooth commute.
BTW I've started riding my bike to work (28 km each way). A lot less stress, and with the traffic situation here it only takes me about 45 minutes a day longer to ride my bike that it does to drive.
>Ultimately we can all point fingers at our favorite villains, whether it be the Arabs, the oil barons, politicians, or whoever. But in the end, it is supply and demand. Demand is going up, and supply is not. Therefore, prices are going up. We have two choices. We can pay more money to maintain the lifestyle we choose, or we can change our lifestyle to conserve. It is that simple.
I will always have a large vehicle because I am a big guy, and I run a business where that vehicle hauls lots of material. Three winters ago we converted our central heating system to run off of locally available wood instead of oil. We invested approximately $10,000 in a system that is guaranteed for 10 years before we need to start paying for replacement parts. It is paid for in savings over three winters.
A lot of people cautioned me as to how much I would not like it, how it would be too much work, how I would have to go outside every day (which I do anyway), etc. But, we made a lifestyle change, and it is working very well. Not all Americans are burdened with a sense of entitlement. Too many are though, I can tell you that. We need some realism in this country. People need to know that they are not entitled to everything they want just because they want it. But it is not until it really starts to hurt that changes will be made.
>We have technologies to build furnaces that can reach efficiencies of 96% these days. That means $.96 of every $1 is converted into useable heat.
Unfortunately, the internal combustion engine as we know it is, at best, around 25% efficent. Don't believe me? Look at all the heat that is dissipated in the radiator and exhaust. Thusly, 75% of your gasoline dollars, and the resource itself, is purely wasted.
No, there are no 200mpg carburators locked up anyplace. The principal of the internal combustion engine is not that efficent, but it is small and compact and generates good horsepower in a small package.
Internal combustion engines can be made to be more efficient. Stationary applications use the jacket water for other heating purposes, and exhaust heat for the same. Problem is, doing this in a car would add a lot of extra weight, making a vehicle heavier to push down the road, and drive up the cost.
>I buy my stained glass materials from a place in Santa Cruz called "Kiss My Glass". There's also one of those outfits here that cleans up after a crime, flood, or what have you that is named "Aftermath".
>Agree, I don't believe the Wankel rotary engine (Mazda) was any more efficient than the reciprocating piston engines. In the 1950's 60's, I remember (think it was GM) a few cars were built as at trial with high pressure, flash boiler steam engines. Probably much more expensive to build. I wonder how they compared with the current crop as far as efficiency. I'm sure they were less polluting as fuel was burned more efficiently than is possible in a cylinder. The steam concept has some major drive train advantages as it produces much more torque at low rpms. I'm not sure they would even need a "transmission" - reversing can be done by running the engine backward. Maybe they need to look at some of the old concepts and see if they will work with todays technology.
>The Wankel as an engine developmennt was a blind alley. On the other hand, I did drive a Mazda rental back in the 19xx'S in Hawaii with a twin rotor Wankel. That thing was a blast.
On the other hand, my current VW derivative Skoda with a 2.0 liter Diesel Turbo is a lot more economical and even faster.