Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Sculptural work

Posts

Sculptural work

#1

Sculptural work

Clay Foster

>This is some of my current sculptural work. The title is "Three Views." About 40" tall. The wood is Rhodesian teak, from a railroad tie. Each tower has a window with a unique view. To see the whole picture, you would have to look out all of the windows.


img

Re: Sculptural work

#2

other side 

Clay Foster

>


img

Re: Sculptural work

#3

Re: Sculptural work

Clint Searl, at the base of Haycock Mtn

>Neat! How did you make the base?

Clint

Re: Sculptural work

#4

Re: Sculptural work

Clay Foster

>Thanks, Clint. The stone base is sandstone, so it's easy to drill holes in it. Each tower has two all thread rods epoxied into the bottom that fit in holes drilled all the way through he stone. I scribe the wood and grind the wood to get a rough fit,and then use carbon paper between the wood and stone to create witness marks on the wood to get a close fit. I use a little wood cutting bit in a rotary grinder to grind away the black mark left by the carbon paper. It takes about 50 mark-and-grinds to get a good fit.

Re: Sculptural work

#5

Re: Sculptural work

Clint Searl, at the base of Haycock Mtn

>Thanks for the explanation, Clay. You could probably give dentists a lesson on fitting crowns.

Clint

Re: Sculptural work

#6

Steven Antonucci

That is a neat piece of work

steve antonucci

>I like the work, and the message it conveys is clear and simple to see in the work. If you wanted to truly conver the way things are, your going to need a bigger rock and a few more railroad ties, though :-)

Steven