Benches with Danish cord seat
David W
>Mark Edmunsen wrote an article in FWW last year with his plans for a Danish-inspired bench in cherry. I liked Mark's design and ended up making the three you see pictured here - 2 in cherry and 1 in walnut.
Knowledge You Can Build On — Est. 1998
Benches with Danish cord seat
David W
>Mark Edmunsen wrote an article in FWW last year with his plans for a Danish-inspired bench in cherry. I liked Mark's design and ended up making the three you see pictured here - 2 in cherry and 1 in walnut.
Re: Benches with Danish cord seat
McKay
>Great job! Do you have a source for the cord? I have weaved using the fake reeding which turned out really well. I like the look of the cord and would like to do a set of chairs. Keep up the work.
the cord?
Bill Tindall, E.TN
>Could we have a close up of the seat pattern? What is the seat material?
The seat material is three ply I believe some kind
on Henthorn
>twisted paper. It comes in at least a couple of diameters and is either laced or unlaced. I prefer the laced to the unlaced. I understand it was developed during world war II in Denmark and was used to wrap vehicle wheels during a time when rubber was in short supply for the German war machine. Pretty durable stuff. I kind of enjoyed working with it. I did a number of single chairs and several sets of chairs over the years. Cats love the stuff better than rush to sharpen their claws on.(G) Below is apicture of one of a set of seats sent me from a couple in New York. This one is little unusual for a Danish Cord example but it shows the weave.

Re: questions *LINK*
David W
>The Danish Cord is a paper-based product and is availabe from a number of caning sources including the ones that Mark Edmundson identified in the FWW article. I got mine (and the L-shaped Danish nails you need) from caneandreed.com. Here's a better picture of the weave. There is a three-part video showing how to do the weaving that is still on the FWW website. Here's the link.
http://www.taunton.com/finewoodworking/SkillsAndTechniques/SkillsAndTechniquesArticle.aspx?id=29678