Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

comfortable Adirondack

Posts

comfortable Adirondack

#1

comfortable Adirondack

BrianA

>I am looking for plans for an Adirondack and ottoman. My wife would prefer ones that glide. I know there are a bunch of them on line, but I want to be sure it is a comfortable one. Some are so stiff feeling and some are oh so beer in hand comfy. I have seen many plans, but was wondering if anyone has a chair plan to recommend?

Thanks

Brian

Re: comfortable Adirondack

#2

Jake's chair *LINK*

doug f, san clemente, ca

>Brian - you might take a look at this one. I've built several using the plan and I like it a lot. It's bigger than most with slightly wider arms that really hold a beer can well!

You'll find hundreds of versions of the Adirondack with a quick search of the internet.

Have fun with your project.

Doug


Jake's Chair

Re: comfortable Adirondack

#3

Re: comfortable Adirondack

Mark Brennan

>I have built several from the plans in Wood Mag. Very comfortable. Have sold several, all are reported to be comfortable.

Re: comfortable Adirondack

#4

Re: comfortable Adirondack

Tom Minehan

>Hello Brian,

I have a set of Easi-Bild plans for Adirondack chairs that I purchased around 1970. They are for either chairs or a settee. I have built many pieces using these plans. Right now I have to build 4 chairs. The trick that makes these chairs so confortable is the seat and back are shallow curved and the arms are wide. The seat is shaped like a horizontal "S" and the back is curved like a "U" shaped gouge. The arms are wide enough to hold a cool drink and a plate of salad. They don't slide. I'm not sure if the plans are still available. I find Adirondack chairs that are straight/flat very uncomfortable compared to these. The chairs I build from thes plans are more like car "bucket seats" as opposed to a "bench" seat.

Re: comfortable Adirondack

#5

Re: comfortable Adirondack

Jim Dillon

>Brian,

I built this one (of two) about 8-9 years ago from a plan in an issue of American Woodworker. Actually it was a Router special issue AW and the author was Andy Rae. I love it and find it very comfortable. The construction is unique in that sliding dovetails are used to attach the arms to the side supports thus avoiding the normal screw attachment from the top. Although I don't find the straight back uncomfortable at all, if I were to make another I would challenge myself to make a slightly curved back using angled sliding dovetails for the rear seat support. As another poster noted, the slight "S" shaped seat makes it even more comfortable. Here is a pic of the chair and one of the basic construction.

Jim


img

Re: comfortable Adirondack

#6

Construction Details Pic #2 

Jim Dillon

>


img