Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Staining Fir

Posts

Staining Fir

#1

Staining Fir

Andy Lincoln,In Dearborn MI

>Hi All,

As part of the summer of refurbish,repaint,and remodel, I am currently stipping the paint of of a closet door. Underneath a few layers of paint is some really nice fir.I would like to stain to a med dark cherry/mahogany color. I have a couple cans of Minwax mahogany stain left from the kitchen and might be just the right color to satisfy the family.I am probably going to topcoat with Minwax,water-based poly in a gloss/semi-gloss sheen. Should I use a sanding sealer,pre-stain conditioner,dewaxed shellac on the bare fir before staining? I am interested in hearing your opinion,thoughts,

ideas on the finishing process.I have an hvlp spray system available and my "spray booth" is under an open air canopy in my driveway.SWMBO says if I get the one closet door right ,I can do the same process to the rest of the doors in the house.

Thanks,

Andy

Re: Staining Fir

#2

Re: Staining Fir

Rob Stokes in North Vancouver

>Fir will blotch when you stain it. Gel stain reduces this effect, but it still occurs. Use a barrier coat of SealCoat, scuff it very gently with 320 to remove the raised grain and stain away. As always - test it first.

Colour choice is yours, but Doug. Fir will mellow to an incredibly orangy colour on it's own - maybe consider using a spar varnish and no colour?

Rob

Re: Staining Fir

#3

Or try orange shellac

Dave Bair, Eaton Rapids, MI

>