Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Wixey Digital Angle Gauge *LINK*

Posts

Wixey Digital Angle Gauge *LINK*

#1

Wixey Digital Angle Gauge *LINK*

Dan Mitchell

>As the catalog listing says, I'm "Tired of leaning over trying to 'see light' between a square and my table saw blade to get exact 90 or 45 degree cuts".

Especially with my abysmal should-be-wearing-bifocals-tried-'em-can't-stand-the-bloody-things eyesight!!!!! ;-)

So I'm wondering if anyone has used one of these digital angle readouts. Seems like a good idea, assuming it's accurate.

Dan


http://www.woodcraft.com/family.aspx?FamilyID=5894

Re: Wixey Digital Angle Gauge *LINK*

#2

Re: Wixey Digital Angle Gauge

Tim Caley - North Little Rock

>Just finished using mine to adjust my tablesaw blade stops for 45 and 90. Measures to the 1/10 of a degree. Very easy to use. Double checked a test cut with my engineer square - perfect.

I would recommend it in a heart beat.

Re: Wixey Digital Angle Gauge *LINK*

#3

Re: Wixey Digital Angle Gauge *LINK*

Dan Mitchell

>Thanks Tim. Right after posting, I found the review in the attached link. Sounds like a good tool, & on sale to boot!

Dan


http://www.onlinetoolreviews.com/reviews/wixeydigi

Re: Wixey Digital Angle Gauge *LINK*

#4

Re: Wixey Digital Angle Gauge

Bill Howatt

>Mine is a Tilt Box but I find it also really great for repeatable setting of blade angles other than 45 and 90.

Bill

Re: Wixey Digital Angle Gauge *LINK*

#5

Re: Wixey Digital Angle Gauge

kenny in indep MO

>Hello, I have had one for about 6 months, found many other ways to use it other than just the table saw. Have used it on the disk sander, jointer, drill press, etc. It's one of the best tools I've bought.

Kenny in indep mo

Re: Wixey Digital Angle Gauge *LINK*

#6

Re: Wixey Digital Angle Gauge

Larry Marker

>I'm happy with mine. I also have their digital planer thinkness gauge. I like it too.

Larry

Re: Wixey Digital Angle Gauge *LINK*

#7

Re: Wixey Digital Angle Gauge

Fred Davis

>I got one last year,and if you do much angle ripping for stave turning , planter boxes etc. this gadget sets the angle fast.

I generally stay away from gadgets, but this is definitely a must have . Fastest way to check the accuracy of your TS factory stop setting I have seen.

I resisted buying Jerry Beals idea for angle checking , tho a very accurate way , the tool seemed sort of flimsy to me.Sorry J.R.

FredD

Re: Wixey Digital Angle Gauge *LINK*

#8

Re: Wixey Digital Angle Gauge

Fred Davis

>If all tools had a "thinkness gauge" , life would be so much easier.

;-)) FredD

Re: Wixey Digital Angle Gauge *LINK*

#9

Re: Wixey Digital Angle Gauge *LINK*

Bob Entwisle in NJ

>Dan,

I bought one a couple months ago for the shop at home and it's great. (big numbers easy to read without my glasses).

I brought it into work one day and ended up buying another one for work. We use it to help speed up fixturing stock for drilling etc.

I got mine for 30 bucks at EagleAmerica.

Bob


http://eagleamerica.com/digital-angle-gauge/p/424-0125/

Re: Wixey Digital Angle Gauge *LINK*

#10

ebd

Re: Wixey Digital Angle Gauge

ebd

>After reading a comparison I also got the Tilt-Box which was rated better than the Wixey and measures to 5/100's of a degree. I use it constantly and have found it both easy to use and extremely accurate. Well worth getting. One thing I would note - THe Wixey has it's magnets on the bottom while the Tilt-Box has it's magnets on both sides. When I first got the Tilt-Box I was concerned but found after using it for about 6 months that I do like the side magnets better.

Re: Wixey Digital Angle Gauge *LINK*

#11

Re: Wixey Digital Angle Gauge *LINK*

Alan in Little Washington (NC)

>Anyone try the new Wixey digital protractor?


img

Digital Protractor

Re: Wixey Digital Angle Gauge *LINK*

#12

Wixey vs Beall

Dan Mitchell

>I saw this comparison on another wood discussion where the reviewer preferred the Beall:

http://www.sawmillcreek.org/showthread.php?t=57944

After reading this, I was leaning (you'll pardon the pun) toward the Beall, but then I read the threads below, where a number of people seem to have found the Beall to be a tad oversensitive/irratic:

http://www.sawmillcreek.org/showthread.php?t=83843

http://www.sawmillcreek.org/showthread.php?t=75655

http://www.sawmillcreek.org/showthread.php?t=71235

One thing I DON'T want is an instrument whose reading is constantly jumping back and forth; I'm considering one of these to GET AWAY from measurement uncertainties. I'm wondering what anyone here may have experienced in this regard.

Dan

Re: Wixey Digital Angle Gauge *LINK*

#13

Re: Wixey Digital Angle Gauge

Steve Kreitler

>I bought one the minute they became available, and I have to say that it's worth every penney.

I make a lot of coopered forms, and use it to set angles to within a tenth of a degree. It was a lot of trouble to do that manually before I got my Wixey.

That being said, if I had known about them at the time, I'd have probably gotten a tilt box, just for the extra decimal place.