Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

TV lift mechanisms - looking for recommendation

Posts

TV lift mechanisms - looking for recommendation

#1

TV lift mechanisms - looking for recommendation

Ed Mulligan, Cape Cod

>I'm designing a cabinet to house a flat screen tv with a vertical lift mechanism. It's very important that the mechanism be reliable. It's for use in an assisted living facility for senior citizens. There are quite a few suppliers / makers for these gadgets. I don't have a good handle on quality of the various units. I'd appreciate if anyone could relate their experiences, good or bad, with the many products available.

Thanks!

Ed

Re: TV lift mechanisms - looking for recommendation

#2

Re: TV lift mechanisms - looking for recommendatio *LINK*

Clay Foster

>I used an Auton motorized lift in a pulpit to raise and lower the reading platform so it would be wheelchair accessible. It's been in use over three years with no problems. It's expensive, but well made. I would use one again.


auton

Re: TV lift mechanisms - looking for recommendation

#3

Re: TV lift mechanisms - looking for recommendatio

Rich in MN

>I design a/v systems and use both Chief and Draper for this type of mounts.

http://www.chiefmfg.com/

http://www.draperinc.com/

Re: TV lift mechanisms - looking for recommendation

#4

Re: TV lift mechanisms - looking for recommendatio

RONALD.KNAPP

>I have no knowledge of the quality of the product but there is a product called Whisper-Ride available from http://www.woodworkerswholesale.com/

Re: TV lift mechanisms - looking for recommendation

#5

Re: TV lift mechanisms - looking for recommendatio

Mike Fitterling

>I believe Whisper Ride is the brand I saw last year at the industrial woodworking show in Orlando. They will sell direct, which was about a third or half of what WWS asks IIRC. I plan to pick up a couple later this year.

Re: TV lift mechanisms - looking for recommendation

#6

Thanks guys!

Ed Mulligan, Cape Cod

>