Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Neat Table *LINK*

Posts

Re: Neat Table *LINK*

#2

Jason Roehl in Lafayette, IN

I did!

Jason Roehl in Lafayette, IN

>There were also some other related videos that were interesting, too!

I have a table that my parents purchased when we lived in Taiwan in the early '80s. The setup is such that if you pull on either half of the table, it will slide out and the leaf will automatically rise into place on a system of ramps and notches. Closed it measures about 3'x4', and fully extended, it's about 6' long (each leaf is about 12" long). My BIL copied the mechanical portion (they had it for several years) to make their dining room table, after which, we "inherited" the table as our homeschoolroom table. Our dining room table (given to us by a customer) also has a neat leaf arrangement. Instead of the leaf going between two halves, the support structure (legs and apron) on one end pulls out like a drawer, which houses the extra-wide leaf, which then sits on the now-extended apron.

I love furniture with creative features like that--hidden compartments, mechanical action, whatever.

Jason

Re: Neat Table *LINK*

#3

Re: I did!

Fred Davis

>"each leaf is about 12 inches long"

How do that work??

FredD

Re: Neat Table *LINK*

#4

Jason Roehl in Lafayette, IN

Re: I did!

Jason Roehl in Lafayette, IN

>12" "long" in terms of adding length to the long dimension of the table--they would also be the same "width" as the table, approximately 3'.

Jason

Re: Neat Table *LINK*

#5

Lee Grindinger

You might enjoy this..., *LINK*

Lee Grindinger

>Scroll down this page to a dining table I built a couple of decades ago. It has a leaf mechanism to deal with 70 pound leaves and concealed drawers. Click on "Open it again, Ruth" to see it repeated. There is also a mechanism for raising and lowering the susan for cleaning and replacement not depicted but I can give you a link to a table in which it's well described if you'd like.

Lee


http://furniturecarver.com/tables.html

Re: Neat Table *LINK*

#6

Re: I did!

Fred Davis

>Thanks for clearing that up Jason, the table leaves are 12" long and 3ft. wide, right?

I really thought you meant 12" wide and 3 ft. long , so you can see how confused I was.

FredD

Re: Neat Table *LINK*

#7

Jason Roehl in Lafayette, IN

Thanks, very interesting...

Jason Roehl in Lafayette, IN

>I had no idea you were an artisan of high-end furniture like that. Everything I saw there were certainly examples of craftsmanship of the highest caliber. Ornate and carved aren't my cup of tea, but I still very much appreciate the skill and time involved in creating such masterpieces.

Jason