Clock Progress
George@Colonel's Workshop-Havertown PA
>Good Afternoon Friends,
The Grandmother clock being made by my best friend and I has sustained several modifications to the original design--if there ever was one. The waist door was to be a full overlay, but that proved to be too proud of the waist front stiles and rails. We decided to make it a partial inset door and are shown beating it into the frame opening. This rabbeting method is hard work, requiring lots of skill. We are simultaneously making some minor alignment adjustment to the molding at the top of the waist where the bonnet will eventually rest. I got it perfect with the next whack. :<)
George



