Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Electrical question - 3-way switch wiring dilemma

Posts

Electrical question - 3-way switch wiring dilemma

#1

Electrical question - 3-way switch wiring dilemma

J D Thomas

>I have a circuit where I've installed a pair of 8' fluorescent T8 fixtures. The fixtures are at the beginning of the circuit and I want to wire in a pair of 3-way switches at the end of the run. What's making it complicated for me is that the wiring in the circuit has 3 wires plus a ground. And both the black and red wires are hot. I'm assuming I don't need both hot wires, but I'm not sure how to configure it all including the neutrals. The lights work now when the circuit is on, and the 3-way switches have a 3-wire run between them. From this point I'm at a loss as to how to get the switches to control the lights.

Any help and advice would be appreciated.

--------------------

J.D. Thomas

ThomaStudios

Re: Electrical question - 3-way switch wiring dilemma

#2

JD, check your email...

Gil Jones on Lake Seminole GA

>I have sent two files that "show" you how to wire it.

Gil

Re: Electrical question - 3-way switch wiring dilemma

#3

Re: Electrical question - 3-way switch wiring dile *LINK*

Dan Mitchell

>Not entirely sure from your description what you're trying to accomplish, but this may help.

Dan


http://www.selfhelpandmore.com/switchoutlet/3way/