Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Ok chainsaw experts, how's the oiler work?

Posts

Ok chainsaw experts, how's the oiler work?

#1

Ok chainsaw experts, how's the oiler work?

John in New Mexico

>Its an old Homelite super XL automatic. No idea what's automatic, but thats what it says. So there's a copper tube going from the oil res. back to where there would be a manual pump, but its not there. Maybe thats whats automatic. There was always a brass plug screwed in there.

I managed to lose the plug! Is that going to be a problem?

Any idea if its just a gravity feed? Doesn't run out when not in use, so I've no clue.

Re: Ok chainsaw experts, how's the oiler work?

#2

Re: Ok chainsaw experts, how's the oiler work? *LINK*

Tom Dunlap

>Does the chain get oil while you cut? You should use a tank of fuel and still have some oil in the reservoir. the oil should be about 90% gone if the auto oiler is adjusted right.

The auto oiler pump is run by a rod that rides on an eccentric lobe on the crankshaft. If the oiler isn't working make sure that the oil res. vent isn't clogged. If it is you'll create a vacuum in the res. and the pump won't work.

I hope that I'm not breaking a forum rule...a friend of mine and I have a discussion forum with a chainsaw forum in the Gear and Goodies area. Someone might be more of a help to you in there.

Tom


Chainsaw forum on Treebuzz

Re: Ok chainsaw experts, how's the oiler work?

#3

Dale Lenz

Re: Might try this link  *LINK*

Dale Lenz

>


Duckbill value?

Re: Ok chainsaw experts, how's the oiler work?

#4

Re: Ok chainsaw experts, how's the oiler work?

Gene Gauss

>Try asking this question on the chainsaw forum on www.arboristsite.com. It's a very active forum on which there are a great number of very experienced chainsaw users, repairman, and dealers. They'll probably get right back to you. BTW, I have a Homelite SuperEZ Automatic, and the only things on it that're automatic are the oiler, and if I understand the thing, a compression release.

Re: Ok chainsaw experts, how's the oiler work?

#5

Couple answers...

John in New Mexico

>Yes, the chain is getting oil. Too much if anything, as I use about one and a half tanks of oil for one tank of gas. Thats less of a concern as the species of juniper that I'm mostly cutting up is pretty hard abrasive stuff.

So what I'm wondering is if the little copper tube and cap that I lost are part of the venting. Nothing goes near the carburetor that I can see. The only diagram I've seen had a manual pump back near the trigger, and thats where the tube goes, but there's no pump, just an empty cylinder with the brass cap that screwed into it. There's another screw down below the trigger that looks like it could be to access the duckbill valve (and I had one so thats where I stuck it).

I couldn't view Tom's forum, don't have some plugin or another installed - terrible about keeping firefox updated. I've seen Gene's forum before, I was talking to a guy from there who sells parts and seemed to know his stuff, but haven't heard back from him (that's where I got the diagram).

Thanks for the input guys, I'll keep digging.