planer snipes
jack dolan
>I have not used my 6" planer for a while. Could someone refresh me
on how to prevent snipes on both ends of stock.
Knowledge You Can Build On — Est. 1998
planer snipes
jack dolan
>I have not used my 6" planer for a while. Could someone refresh me
on how to prevent snipes on both ends of stock.
Re: planer snipes
Pete in Holland, MI
>Lift slightly as the board is exiting the planer. Once the board passes the infeed roller, and the board is not supported anymore and will lift towards the cutter. Same goes true with snipe on the front of the board.
Re: planer snipes
Mark Mandell - Gone Round In Jersey
>Sounds like your knives need to be reset and your table checked for coplanarity. Doesn't take much to tune it up. look at your owner's manual.