Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Finally Finished a Project! New Table

Posts

Finally Finished a Project! New Table

#1

Finally Finished a Project! New Table

Garrett in Victoria

>Three months ago I somehow injured my sciatic nerve and was completely out of action for almost that whole time. Not fun, but almost back to normal now.

In the interim some of you had replied to my request for info on staining a solid Burmese (Myanmarese?) teak table to match some chairs my wife had purchased. Although the answer was that it could be stained, almost everyone wondered why anyone would so so. Sanity prevailed and we decided to use that table elsewhere and that I should make a new one. We got a design idea, but I was only able to get to work on it a couple of weeks ago.

The chairs are stained birch - so-called 'medium cherry'. I made the table base out of Brazilian cherry (Jatoba) and stained it lightly to match. The construction is simple. A vertical lap joint for the two horizontal frames - no glue - with their ends blind-mortised and double pegged into the legs. Using the bandsaw and finishing on the router table with the jig below, I undercut and rounded the edges of the frames both to lighten their impact, and as a nod to the curves in the chairs. Ditto the grooving on the faces of the legs. The glass is 40" x 5/8" tempered with a 1" bevel.





Cheers, Garrett

Re: Finally Finished a Project! New Table

#2

Corrected Version with Missing Pics

Garrett in Victoria

>Three months ago I somehow injured my sciatic nerve and was completely out of action for almost that whole time. Not fun, but almost back to normal now.

In the interim some of you had replied to my request for info on staining a solid Burmese (Myanmarese?) teak table to match some chairs my wife had purchased. Although the answer was that it could be stained, almost everyone wondered why anyone would so so. Sanity prevailed and we decided to use that table elsewhere and that I should make a new one. We got a design idea, but I was only able to get to work on it a couple of weeks ago.

The chairs are stained birch - so-called 'medium cherry'. I made the table base out of Brazilian cherry (Jatoba) and stained it lightly to match. The construction is simple. A vertical lap joint for the two horizontal frames - no glue - with their ends blind-mortised and double pegged into the legs. Using the bandsaw and finishing on the router table with the jig below, I undercut and rounded the edges of the frames both to lighten their impact, and as a nod to the curves in the chairs. Ditto the grooving on the faces of the legs. The glass is 40" x 5/8" tempered with a 1" bevel.





Re: Finally Finished a Project! New Table

#3

Alan Young

The trouble with a cool table is that

Alan Young

>it's almost always blocked by the chairs! At least with the glass top the base can be seen.

Nice work Garret!

Alan

Re: Finally Finished a Project! New Table

#4

glass question

Bill Tindall, E.TN

>Can such a top be readily purchased somewhere or did you already have it from some other table. Is the glass held in place by any means? thanks for posting......

Re: Finally Finished a Project! New Table

#5

Re: Finally Finished a Project! New Table

George@Colonel's Workshop-Havertown PA

>Very nice Garrett,

You sure nailed the color of those legs and rails. I bet the top weighs a ton!

George

Re: Finally Finished a Project! New Table

#6

Ellis Walentine

Nice, Garrett!

Ellis Walentine

>Sorry to hear about your sciatica problem. With all my back trouble over the years, I have to knock wood that I never got that kind of nerve impingement. I hope you recover completely.

The table looks great -- sturdy and just the right color to complement your chairs. I'll bet it feels good to be back in the shop!

Cheers,

Ellis

Re: Finally Finished a Project! New Table

#7

Re: glass question

Garrett in Victoria

>Hi Bill

It was a custom order. A standard 42" top 3/8 thick with a really neat "waterfall" edge was available for under $150 from Pier 1 Imports, a chain store, but the glass wasn't tempered, and I worried about the potential for injury given that the support is only at 4 points. Besides, my wife thought it looked "flimsy" and also insisted on 40" d.

I went to a local glass house and got quotes on tempered 3/8" bronze glass, but the "flimsy" issue wouldn't go away, and I ended up ordering the 5/8, tempered with a 1" polished bevel. At $565, it wasn't inexpensive, but SWMBO is very happy and that's what counts.

Cheers, Garrett

Re: Finally Finished a Project! New Table

#8

Holding the Glass in Place

Garrett in Victoria

>Sorry, Bill

Forgot to answer your second question. The glass sits on 4 small - about the size of a nickel and 1/16" thick - clear plastic washers centered on the top of each leg. They're available from the glass shop for the asking. The top weighs about 80 pounds, so it isn't going anywhere on its own, However, if we want to slide the table around - there are 4 1'x1' hard felt pads glued to the feet pf the legs and it moves easily - we have to remember to pull by the frame.

Cheers, Garrett