Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

PC 7529 Router - faulty switch

Posts

PC 7529 Router - faulty switch

#1

Louie Lovas

PC 7529 Router - faulty switch

Louie Lovas

>Hi all,

I own 3 of the Porter Cable 7529 plunge routers. I bought one new, one refurbished and the last one used. I've owned them for about 6-7 years. While I like the features of this router quite a lot, the main reason I have 3 of the exact same brand/model is for all the jigs, baseplates and other fixtures. All good reasons IMHO. However, the on/off switch on all of them is absolute crap and the darn thing always seems to fail at the worst time, arrggghhh! I've had all 3 serviced multiple times at about $70 a pop. I recently bought a handful for switches, although I've not attempted to replace one yet - I'm hoping I can do that myself. It's just too costly to have them serviced.

Anyone else have this model router with this problem, any permanent solutions out there?

thanks in advance.

Re: PC 7529 Router - faulty switch

#2

Perma-on

Mark Goodall - ATL - tooljunkie

>I have a bunch of those too. I snagged the last display model at Lowes when they were liquidating them, and then got 3 more that were in unopened boxes. I knew about the switch problems, but for $25 I figured I could live with it. I've opened a couple of them up and can see how the switch was a problem. It seems too complicated internally to last long.

I seem to remember them changing the design somewhat to correct the issue, but then they discontniued making them when they came out with their newer line of routers.

I haven't had one open in a while, but I remember it wasn't too hard to bypass the switch altogether using some electrical crimps. Of course, thats for the routers used in jigs and tables with a separate power switch. I figure I have enough spare parts from them to service the others if/when they fail.

Happy Woodworking!