Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Grizzly tools good or bad?

Posts

Grizzly tools good or bad?

#1

Grizzly tools good or bad?

Edward McCormack

>Hello everyone,

I'm looking into getting a bandsaw and a jointer. What i'm wondering is does anyone have any Grizzly tools and if they're any good. Here is a link to the ones im looking at.Any help is greatly appreciated.

Jointer http://www.grizzly.com/products/G0586

Bandsaw http://www.grizzly.com/products/G0457

Thanks Again.

Ed 9 1/4

Re: Grizzly tools good or bad?

#2

Grizzly tools good or bad? Dumb Q. Dumb A:

Forrest Addy

>Grizzly tools good or bad? Dumb question. Dumb answer: it depends.

Grizzly has a broad product line drawn from many manufacturers. Asian import woodworking machinery is considerably improved over the last ten years but a critical buyer might still find fault over minor points of fit and finish. As a whole they tend to be well designed. If there are any consistant problems associated with Grizzly woodworking its assiociated with iron casting metallurgy: they are stable enough but somewhat soft. This poses no problem for the low volume home shop woodworker but a commercial shop running a table saw 8/5 may discover unacceptable wear over 5 years or so service.

The bandsaw you refer to is no better or no worse than any other similar saw in its price range.

One important consideration is Grizzly's excellent after sale service and warranty.

So "good" or "bad" depends of dozen of factors. Make a list, comparison shop, check out warranties and service records. In other words, shop wisely.

Re: Grizzly tools good or bad?

#3

Re: Grizzly tools good or bad?

Larry Clinton At Frankfort (Central)., Indiana

>Grizzly are Asia imported tools - IMHO, they are a cut above the mass of "imported iron". The truth is almost all stationary tools produced today for the small shop (vs industrial factory type woodworking) is imported from Asia. I know Delta, Powermatic etc. are now made in Asia. In my opinion the imported Delta, Powermatic, Porter Cable and other name brands are not of the quality of the Grizzly although they are much higher priced as many people believe the product is the same as it was when manufactured in the USA (IT IS NOT). Grizzly has the benefit of having been an importer for many years and has a pretty good handle on controlling the quality of the product. They also have an extensive replacement part inventory and a good service organization. I believe they are one of the best "values" on the market. There are better pieces of equipment made, usually from Canada or European nations. For example I know my MiniMax MM16 band saw has a lot better fit and finish than the Jet, Grizzly, Delta etc. But it cost about twice as much. General (made in Canada - not General International) makes very good machines - in my opinion better than any of the Asian imports - but again the price is much higher.

I have a Grizzly 8" joiner (replaced my Grizzly 6" joiner), it works very well - I have no complaints. I also have a Grizzly 3hp cyclone. It did have an issue with the motor capacitor while under warranty. Grizzly took care of the problem with no cost to me and to my satisfaction.

Re: Grizzly tools good or bad?

#4

Re: Grizzly tools good or bad?

Tom MacGregor

>I prefer to restore vintage machinery for my home shop, but found old bandsaws to selling for more than I thought they were worth and purchased a new Grizzly GO555 with a riser block. The stock blade was junk but I've made some very thin accurate cuts with a Timberwolf blade in it. It's a little underpowered for heavy resawing but will do OK if I don't rush it. I'd want something heavier for a production shop, but have found it to be well worth the price for my use.

Re: Grizzly tools good or bad?

#5

ALL Metal . . .

steve mackay

>was what sold me on my sanding machine. Most of it cast. ONE plastic part. The hose connector on the disk housing. Thats it. Compared to the Craftsman I replaced that, now-a-days, is 90% plastic. More power than I know what to do with. The customer service was better than most ( not counting LV ! ). Shipping & delivery was lickety-split ( faster than USPS ! ). About everything and every component / part is heavy duty. While I Jet and Delta haunt my dreams sometimes Grizzly is affordable on retired GI, backyard shop money. Compared with "homeowner" brands I feel I got more than my moneys worth. Their cabinet saw is next on my list of replacement purchases.

Re: Grizzly tools good or bad?

#6

Re: ALL Metal . . .

Chuck in ND

>Some of it depends on where you live, for me by the time I pay shipping the cost isn't that much of a savings and if I have a problem with a machine that I just pulled out of the box or crate and I bought it locally, I can take it back and get another that day, or the next day.

Re: Grizzly tools good or bad?

#7

Re: Grizzly tools good or bad?

Bob in NE Ohio

>I have been using Grizzly since the 80s and have had great success. Contractor Saw, Drill press, Jointer, Planer, Nail Guns, 6x48 sander.

I had one issue in all of the time and they replaced the unit in three days. It does not get better than that for the price. Take the leap, you will not be disappointed in the value or quality.

Not associated just a happy user.

Bob

Re: Grizzly tools good or bad?

#8

Bob . . .

steve mackay

>You like the "contractor" saw ? I'm still up in the air over that or the cabinet saw. With my limited space I wheel my Craftsman around the shop and, sometimes, out the door. Is Grizzly's fairly "mobile" ?

Re: Grizzly tools good or bad?

#9

Re: Bob . . .

Steven Mellott

>Bob:

I've owned the Grizzly GO586 jointer for one year and I really like it. I use it in a home hobbyist shop and it meets all my needs. When it was delivered, I was missing a small electrical grommet. I called Grizzly and received the grommet 2 days later. I also have several friends who have bought Grizzly tools and are very satisfied (especially with the 1023 table saw and 555 band saw).

Re: Grizzly tools good or bad?

#10

If mobility is your problem get a mobility kit.

Forrest Addy

>If mobility is your problem get a mobility kit.

If you have metalworking skills and a source for structural steel besides the "usury rack" at the home center (be advised: you'll pay 4X the steel yard price) you can bolt together a sturdier handier mobility kit than Shop Fox can affod to import.

Or weld it and make it sturdier yet.

PS Use good casters. POS home center casters don't last long in sawdusty environment.

The beauty of mobility kits is you can move your equipment out doors for bigger projects when you need to - or clean the shop.

Re: Grizzly tools good or bad?

#11

Re: Don't be too envious of the Jet / Delta .

Larry Clinton At Frankfort (Central)., Indiana

>Steve, I have attended every Woodworking tool show in Indianapolis for the last few years. I am a retired Manufacturing/Quality Engineer, so have quite a bit of experience with equipment. Looking over the offerings at the shows, I would rate the Grizzly equal to the Jet and WAY above the Delta offerings of the last couple years. This appraisal includes the Joiners, Planers, Band saws & table saws. I own a Delta Unisaw & Stationary sander (both US made)- IMHO at this point there is no equipment (Asian made) that Delta offers that is the quality of the Steel City, Grizzly, Shop Fox (Grizzly Clone) or Jet equipment. The only equipment that I inspected at the shows that were above and beyond the Grizzly quality/value were General (Canadian made) and the MiniMax and Felder Band saws. Although owned by the same conglomerate, and offered at a much lower cost, I believe the Jet equipment is better designed and built than the new Delta. Much of the Jet, Shop Fox, Grizzly etc. equipment on close inspection appear to be made in the same factory with most if not all functional parts identical.

Re: Grizzly tools good or bad?

#12

Steve...

Joe in a Cleveland Suburb

>I have the Grizzly 1023SL in my basement. It's on one of those mobile base things. I think made by Delta where you just supply the wood pieces. I rarely move it, but it works fine when I do.

As far as quality goes, my Grizzly stuff is better quality than my Delta stuff by far. I have a 6" Delta "Pro" jointer. I always felt it was lacking in quality.

About a month ago I bought a $300 Steel City mortising machine. I haven't really used it yet, but it seems to be a rock solid machine. I bought it at the local WoodCraft. Comparing it to the Delta and Jet machines side by side at the time, I would say the Steel City machine had much better build quality than the the Delta and Jet. As I recall though the Steel City machine was a little more in price. Not that that should affect quality.

I had a Grizzly brad nailer several years ago. It finally broke. But it was a cheapo. Can't complain. I replaced it with a newer Grizzly model and it seems pretty solid. Just as solid as my Porter Cable framing nailer and finish nailer.

Joe

Re: Grizzly tools good or bad?

#13

Re: Grizzly tools good or bad?

Tony - Memphis

>I'm not a big Griz fan. I have had bad experiences with their product and their service. But, I have had one of their 6" jointers that I have been using for around ten years and it has performed very well. It does a good job and is still kicking and probbaly will be for quite a while (hope so!). So, while I'm not a big fan, I can't suggest their products aren't any good. The reason for my bias is a long story, but they sent me a jointer with a bad part, gave me very poor service at their local store, and then sent more bad parts to fix the original bad part! I ended up fixing the original myself. When I was looking at buying some of my big tools, I was told that the Griz products are a good value, but that you may have to put some effort into fine tuning, etc.

Tony

Re: Grizzly tools good or bad?

#14

Danke !

steve mackay

>

Re: Grizzly tools good or bad?

#15

Re: Grizzly tools good or bad?

Wayne Carson

>I have a 8" jointer, 15" planer and a drill press. Owned a Delta 13" planer and the Grizzly 15 is much quieter and does a better job. Had a problem with a chuck I bought from them it busted and they sent me another one within 24 hours. My son just bought a cabinet saw from them and is totally satisfied. I don't think you would be disappointed.

My 4 cents worth

Re: Grizzly tools good or bad?

#16

Re: Grizzly tools good or bad?

Edward McCormack

>Thank you everyone for the info. Forrest Addy sry about the dumb Q but thanks for the dumb A.