Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Top coating a milk paint finish?

Posts

Top coating a milk paint finish?

#1

Top coating a milk paint finish?

lee beeden

>Firstly many thanks to all that gave great feedback to the questions

regarding a "Glue-up disaster" .I built my own version of this piece

(see photo attached) and everything has worked out good in the end.

I firstly applied a water based prima, followed with two coats of milk paint and it looks great!!! However I am not sure how durable this finish is?

If I was to top coat with a water based polyurethane(which is what I happen to have in stock) how would this look , and do you think it is needed?

Thanking you all in advance

Lee


img

Re: Top coating a milk paint finish?

#2

JL

Re: Top coating a milk paint finish?

JL

>I've top coated milk paint with acrylics and with oils. I don't see a reason why you couldn't use water borne polyurethane.

I would top coat it. Milk paint wears fairly easily.

My $0.02.

Re: Top coating a milk paint finish?

#3

Re: Top coating a milk paint finish?

John McGaw

>I've had excellent results topcoating milk paint on Shaker boxes with clear poly. All it takes is a bit of a rub with some fine steel wool first to get rid of the chalky top of the milk paint. The finish is satin smooth after one or two coats of poly and just a bit of wax finishes it up beautifully.

Not quite sure about the OP's use of water based primer under the milk paint though. It would seem to me that nothing in the world would stick more tenaciously to wood than just plain milk paint and that primer of any sort might weaken the bond.

Re: Top coating a milk paint finish?

#4

Ellis Walentine

Top coats for milk paint

Ellis Walentine

>Mike Dunbar recommends an oil finish over milk paint. Depending on the oil or varnish you use, it will either darken the milk paint or leave the color pretty much as is. Water-borne finishes are usually "water-white," or almost. If you want to deepen the color, try Waterlox or another oil-based varnish. Poly will add abrasion resistance.

Ellis

Re: Top coating a milk paint finish?

#5

Top coating a milk paint finish, Pic

Jim Shaver Oakville, Ont.

>Hi,

I have used BLO over milk paint, it sets the colour a tone deeper and according to what I was told on line when I asked the same question essentially acted as a sealer, but I don't know for sure. I then used a wipe on varnish as a top coat. I believe John McGaw actually gave me the idea as well..

:-)

Photobucket

This is a project made with that recipie.

Take care,

Jim

Re: Top coating a milk paint finish?

#6

Perhaps, but certainly acceptable

Michael Dresdner

>Needed? That's up to you and how you use it, but it is certainly acceptable and appropriate to topcoat milk paint (which is, as you certainly know, a waterbased paint) with clear waterbased polyurethane. It will make it easier to clean, and may add some wear, though milk paint by itself wears quite well. Waterbased polyurethane, unlike oil based coatings, should not change the color at all, at at worst may add a bit of sheen to the very matte milk paint.

Re: Top coating a milk paint finish?

#7

Re: Top coating a milk paint finish?

Steve Schoene

>I've got a question. What brand of milk paint did you use? What makes me think about this is that you said you applied a primer before the milk paint. The milk paint I've used says not to do that but to apply milk paint directly on bare wood.

But, there are some finishes that tell you they are milk paint, but are really acyrlic paint with "milk paint colors". General Finishes has one of these. It's a bit irksome that you have to read the fine print just to find out what general kind of finish you are using.

If that's the case , there wouldn' be much difference in the advice however although the potential color deepening that would come from using an oil based finish over it would be a bit less I would think.