Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Trim Routers

Posts

Trim Routers

#1

Trim Routers

Dick H

>Age has caught up with me and I find my full size router a bit to heavy for rounding over the edges on assembled projects. I am wondering if a trim router is the answer since they are small and much lighter.

Am I right that they will hold a normal 1/4" shank bit, also what to look for when choosing a brand to buy. At this point I think all I need is the motor and the flat base.

Re: Trim Routers

#2

Re: Trim Routers

Howard Norman

>>Am I right that they will hold a normal 1/4" shank bit, also what to look for when choosing a brand to buy. At this point I think all I need is the motor and the flat base.<

I have had a P-C trim router for a long time and yes all that I have seen take a 1/4" bit. I normally keep a 1/8" roundover bit in mine.

h

Re: Trim Routers

#3

Re: Trim Routers

Glenn Madsen, SF Bay Area

>I'm not that old, and yet I use trim routers for much the same purpose you describe.

My favorite is the Porter Cable PC310, which is rumoured to be discontinued, but it's a nice find, if you can get your hands on one.

I have a PC 7310, a less-rugged version, possible less accurate as well. I added base kits to my 310 and 7310 from Pat Warner, and they work better than before.

In a weak moment, I also bought a Bosch Colt PC20 (I think). Variable speed, nicer box, not much nicer working. It's not up to really heavy work that a larger router would blow through easily, but it trims nice coves and beads. If one had to go, for me it would be this one, although it's the newest in the shop.

I do these things for fun, and to make stuff my kids have to keep around, or risk irritating their childrens' grandfather. ;-)

Re: Trim Routers

#4

The Basics

Howard In Toronto

>If you can, try each one in your hands.

See which one "feels"right.

Next, see what you think of the visibility of the bit in the machine.

This is important if you use it to freehand to pencil lines on templates etc.

Then there's the two evils - noise and vibration.

That's the parameters to check - if you can get out to see/feel them.

If not, get as many opinions/reviews as possible.

HTH

Howard

P.S. - FWIW - I buy Makita trim routers for the very reason you mentioned. Soft start, tons of power and bulletproof plastic body (DAMHIKT)

Re: Trim Routers

#5

Re: Trim Routers

Jim Dillon

>Dick,

I think you would find a trim router to be very useful exactly for what you intend to use it for - rounding edges. I often keep a 1/8-3/16 inch roundover bit installed full-time to just be able to pick up and immediately use. I have the PC-310 and, except for the sticky collar, is a workhorse and very stable to use on narrow pieces of wood. There have been several recent posts regarding its availability. If it is being discontinued(sad), maybe you can pick one up at a good price. I have no experience with other brands.

Jim

Re: Trim Routers

#6

Re: Trim Routers

Craig McCormick

>I have the Bosch Colt and love it. We use it mostly for mortising hinges and door hardware in our home repair business. I used it to hang ten doors last week. Great little router.

Good luck,

Craig

Re: Trim Routers

#7

Re: Trim Routers

NickB in Easter Mass.

>I third the recommendation for the PC310 - mine usually lives with a 1/8" roundover bit (so nice to be able to handle the router with one hand, and manuever the work with the other), except when I'm hanging doors (top-bearing mortising bit). Much easier to handle than even a 1 3/4hp router.

If you get a PC310, make sure you keep the collet lubricated, and keep a piece of scrap wood with it to loosen the bit when you want to change (a firm tap does it every time, as long as you haven't bottomed out the bit and the collet is lubed).

Nick

Re: Trim Routers

#8

Bosch Colt...great tool

Steve in Brooklyn

>