Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

If your monday was to much . . .

Posts

If your monday was to much . . .

#1

If your monday was to much . . .

steve mackay

>DRILL PRESS:

A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, denting the freshly-painted vertical stabilizer which you had carefully set in the corner where nothing could get to it.

WIRE WHEEL:

Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprints and hard-earned calluses from fingers in about the time it takes you to say, "Oh he...."

ELECTRIC HAND DRILL:

Normally used for spinning pop rivets in their holes until you die of old age.

SKILL SAW:

A portable cutting tool used to make studs too short. P.S. they don't call it a SKILL SAW for nothing!

PLIERS:

Used to round off bolt heads. Sometimes used in the creation of blood-blisters.

BELT SANDER:

An electric sanding tool commonly used to convert minor touch-up jobs into major refinishing jobs.

HACKSAW:

One of a family of cutting tools built on the Ouija board principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your

future becomes.

VISE-GRIPS:

Generally used after pliers to completely round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.

WELDING GLOVES:

Heavy duty leather gloves used to prolong the conduction of intense welding heat to the palm of your hand.

OXYACETYLENE TORCH:

Used almost entirely for lighting various flammable objects in your shop on fire. Also handy for igniting the grease inside the wheel hub out of which you want to remove a bearing race.

TABLE SAW:

A large stationary power tool commonly used to launch wood projectiles for testing wall integrity.

HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground after you have installed your new brake shoes, trapping the jack handle firmly under the bumper.

EIGHT-FOOT LONG YELLOW PINE 2X4:

Used for levering an automobile upward off of a trapped hydraulic jack handle.

E-Z OUT BOLT AND STUD EXTRACTOR:

A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.

BAND SAW:

A large stationary power saw primarily used by most shops to cut good aluminum sheet into smaller pieces that more easily fit into the trash can after you cut on the inside of the line instead of the outside edge.

TWO-TON ENGINE HOIST:

A tool for testing the maximum tensile strength of everything you forgot to disconnect.

CRAFTSMAN 1/2 x 24-INCH SCREWDRIVER:

A very large pry bar that inexplicably has an accurately machined screwdriver tip on the end opposite the handle.

AVIATION METAL SNIPS:

See hacksaw.

PHILLIPS SCREWDRIVER:

Normally used to stab the vacuum seals under lids or for opening old-style paper-and-tin oil cans and splashing oil on your shirt; but can also be used, as the name implies, to strip out Phillips screw heads.

STRAIGHT SCREWDRIVER:

A tool for opening paint cans. Sometimes used to convert common slotted screws into non-removable screws.

PRY BAR:

A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.

HOSE CUTTER:

A tool used to make hoses too short.

HAMMER:

Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate the most expensive parts adjacent the object we are trying to hit.

MECHANIC'S KNIFE:

Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector magazines, refund checks and rubber or plastic parts. Especially useful for slicing work clothes, but only while in use.

DAMMIT TOOL:

Any handy tool that you grab and throw across the garage while yelling "DAMMIT" at the top of your lungs. It is also, most often, the next tool that you will need.

Re: If your monday was to much . . .

#2

The original was better…

Rod Peterson -- Ormond Beach

>

The Right Tool For The Job

by Peter Egan

Road & Track

April, 1996

Rod


Re: If your monday was to much . . .

#3

Re: Tuesday . . .Woodworking

Mark Mandell - Gone Round In Jersey

>LEVEL: Affectionately referred to as �The Bubblestick,� it is usually employed after-the-fact to determine the average percentage level of any number of psycho-active substances in the collective bloodstream of a given structure�s original framing crew; that percentage being a function of the resulting slope in floors and departure from vertical of the structure�s walls.

FRAMING SQUARE: A real-world example of an oxy-moron, this is an �L� shaped piece of steel uselessly demarcated in units of measure. They are prominently placed in lumberyard tool displays but sold exclusively to homeowners to perpetuate the myth that one was ever used by the idiot/alcoholic/drug addict who built their residence.

EIGHT-FOOT SPRUCE 2X4: A favorite framing member used in vast quantities by handyman-remodeling contractors with the word �Doctor� in their business name. Most commonly installed in the prized �wet/green� state, they are unsurpassed for producing the ever-popular �undulating wall� effect as they dry after installation, and are economical in use because they only require a single toenail at top and bottom.

MITER SAW: A portable electric cutting tool usually employed to screw up a maximum amount of crown molding in a minimum amount of time while still making near-perfect 90� and 45� cuts.

SELF-RETRACTING TAPE RULE: One of a family of precisely demarcated measuring instruments used to quickly determine the exact length needed to cut an EIGHT-FOOT SPRUCE 2X4 precisely 1 inch too short.

ADJUSTABLE SQUARE: Another real-world oxy-moron, it�s employed by altered-state carpenters to refute any assertion that their work is not square. Also used with a protractor as an adjunct measuring device similar to a LEVEL.

mm