Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

6/4 or 8/4 source for exceptional walnut

Posts

6/4 or 8/4 source for exceptional walnut

#1

6/4 or 8/4 source for exceptional walnut

Scott in Montana

>Hello all,

I have a commission for a table to be built this Fall/Winter and need a very, very nice piece of 6/4 or 8/4 walnut for the top. The finished top will be roughly five feet by two feet. Sadly, one of the few disadvantages of living here in Montana is sometimes it's hard to find such things. Can anyone suggest a good reputable source?

I am willing to pay what it takes for an exceptional piece.

Best regards,

Scott

Re: 6/4 or 8/4 source for exceptional walnut

#2

Re: 6/4 or 8/4 source for exceptional walnut

John D. Luke

>Scott,

How far are from Twin Falls, ID?

There is a guy there that has some good looking walnut for sale. Check Woodweb under the lumber for sale heading.

To make him easier to find, sort list by state and scroll down to ID.

Re: 6/4 or 8/4 source for exceptional walnut

#3

Re: 6/4 or 8/4 source for exceptional walnut

Scott in Montana

>Hi John,

I'm about six hours away, but considering how much it would cost to crate and freight a large piece, driving might be cheaper. And I'm fully aware that I might end up buying a piece twice the size that I actually need.

Thanks

Scott

Re: 6/4 or 8/4 source for exceptional walnut

#4

Re: 6/4 or 8/4 source for exceptional walnut

Thomas S Stockton

>Scott

Two sources come to mind, Goby wood products in Portland and northwest timber an hour or so south. I've used Northwest and was very pleased with the wood not cheap but they will give you an honest description of what they are sending.

Tom

Re: 6/4 or 8/4 source for exceptional walnut

#5

Re: 6/4 or 8/4 source for exceptional walnut

Joe in a Cleveland Suburb

>Hope Gary doesn't mind, but I just bought some very nice walnut from Gary Evans. Might send him a note.

Joe

Re: 6/4 or 8/4 source for exceptional walnut

#6

Re: 6/4 or 8/4 source for exceptional walnut

Craig in Silverdale

>Northwest Timber in Jefferson, Or. Good luck in your search.

http://www.nwtimber.com/location.asp

Re: 6/4 or 8/4 source for exceptional walnut

#7

Eye teeth for sale: no reasonable offer refused

Scott in Montana

>Thanks for the leads Tom. I talked with Lewis today at Northwest Timbers and a couple thousand dollars later I have exactly what I wanted on the way.

Here's the rub; now that I know what he has, I want more! What happened to the good old days when the first taste was free? :O)

Scott

Re: 6/4 or 8/4 source for exceptional walnut

#8

Da big dollar top 

Scott in Montana

>


img