Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Curio - buy or build? Glass cost.

Posts

Curio - buy or build? Glass cost.

#1

Curio - buy or build? Glass cost.

Dan Manturi

>Dilemma - I need a couple of china cabinet - curio display cabinets for my dining room. I like building, because you can make teh size to what you like. But these should be glass - doors, shelves, sides. Seems to be that the cost of the glass for such cabinets (like 32" wide x 14" deep x 70" high) would be cost prohibitive, and I'd be better off just buying a couple. Have little experience buying glass.

Not concerned with the pride of building something myself on this one.

Comments welcome.

Dan M.

Re: Curio - buy or build? Glass cost.

#2

Re: Curio - buy or build? Glass cost.

Thomas Skaggs, Foothills of Mount Level

>The only glass that will be pricier will be the shelf glass. The glass for the doors and sides can be common plate glass if desired.

But the question you pose is essentially pitting apples against oranges over cost. If you build them yourself you will have well made units that fit your vision, are the exact size you need and something you can enjoy doing and get satisfaction from. If you buy lower cost curios you will get just that...low cost furniture.

If you intend to buy curios of high quality, equal to what you could build yourself then I guarantee the ones you would build yourself will be cheaper in the end....and still better.

Re: Curio - buy or build? Glass cost.

#3

Re: Curio - buy or build? Glass cost.

George@Colonel's Workshop-Havertown PA

>good Afrternoon Dan,

Glass cost is always a factor, but I never let it make up my mind. I figured my cabinets were well worth the glass investment, as the cabinets would be in the family for a long time. In the shorter term, my own cabinets reflect my current needs and are styled as I desire. I am not dependent on commercial offerings.

George

Re: Curio - buy or build? Glass cost.

#4

Cut down the Glass cost.

North of the Border

>Glass for door and sides don't have to be the same kind and thickness of glass for the shelves. You can cut down the cost a lot by choosing thinner glass. After all, the glass for the door and the sides don't have to be thick at all - to me the thinner the better (especially for the door). Thin glass is cheap. If the items you display are of light weight, you don't need thick glass for the shelves either.

As for the cost, there's no way you can compete with mass produced but dry and dull looking curios. Depending on what you are to display in those curios, you may better display your items on a nice wall shelf system (made in your own shop) than in a cheap looking or un-stylish curio. That's my cents and everyone has to decide whether it's better to build or to buy. Almost every piece you make can be an heirloom piece (if that's one of your considerations) but the same can rarely be said of commercial furniture - unless you buy the high-end pieces e.g. at Ethan and Allan or the like.