Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

An evening in the shop....

Posts

An evening in the shop....

#1

Alan Young

An evening in the shop....

Alan Young

>This Saturday I visited a good friend of mine-Ed. Ed has been rehabbing a house and I wanted to see the work he had accomplished. I enjoyed seeing all the efforts had had put into the house. Then he showed me a newel post and piece of cherry he wanted to use as cap for the post. He wanted to put some Greene and Greene style pegs into the cap. I told him to bring the piece to my place and we'd take of the job. Ed brought his 9 year old son Noah with him. I wasn't sure how interested Noah would be to see the shop so I asked he he would prefer to stay upstairs and watch the Pistons game on TV. To my surprise he chose to come down to the shop.

I proceeded to show Ed my new Mill Drill and the Fluting Jig I made. Ed thought they were cool but Noah was just as interested as his Dad-In fact he was totally excited about all the machines and the couple of projects I had underway. One project is table that will have a beaded detail along the aprons. Earlier in the day I had my beading tool out running beads for the project. Noah(9 years old) wanted to try it out.....


Here Noah cuts off the end where he ran the bead.


Ed-(He's the Dad remember) had wanted to have some square holes cut for some Greene and Geene Plugs for the Cherry cap he was going to use for his newel post. So I cut the square holes using my hollow chisel mortiser. Noah was very intrigued with this machine so we cut a cross in the pine piece in which he had just run a bead. The we prepared some 1/4 Wenge to inlay ...

Here Noah meets hide glue:


Here is Ed's New Cap and Noahs beaded Pine with Wenge Cross inlay


Three hours in my shop never seemed so FUN!

Alan

Ed and Noah-


Re: An evening in the shop....

#2

Re: An evening in the shop....

Paul Leuba

>I am sure that Noah will talk about that day fondly when he grows to become a dedicated woodworker. You've recruited another to our midst.

Paul in Hunt Valley, MD

Re: An evening in the shop....

#3

Re: An evening in the shop....

Brint in Richmond, VA

>Thanks for posting -- makes my heart sing...

Re: An evening in the shop....

#4

Re: An evening in the shop....

Stuart Hough

>The slippry slope doesn't seem so steep when you start out that young! Good Job!!!

Re: An evening in the shop....

#5

Re: An evening in the shop....

Roy Gryder

>There is a saying that "you never stand so tall as when you stoop to help a child". R.

Re: An evening in the shop....

#6

Re: An evening in the shop....

Rich Glisson (Durham, NC)

>I can tell by the look on that little boy's face, particularly in the second pic, that he has the concentration that is necessary to become a fine craftsman. Reminds me of me at that age! Good going, Alan!

Re: An evening in the shop....

#7

Working with kids and a request

Lee Schierer - McKean, PA

>I also find it rewarding to work with kids in the shop. My grandkids don't fail to come out in the shop when they are around and I go out there. Usually tehy want to make something, so I have to come up with something within their skill level and help them. My work can wait...working with tehm is a lot of fun and educational both directions. They leran from me and I learn about them.

Would you mind posting more details of the beading tool? How it is made and how you make the cutters?

Lee

Re: An evening in the shop....

#8

Alan Young

The beading tool.... *LINK*

Alan Young

>was made for the Tool contest.

....


It works OK but needs a couple of refinements. I should move the cutters' mounting holes about 1/4 closer to each cutting end. And the brass stops should be rounded over as I end up grabbing them as "handles" almost as often as the designated handles.


More descriptions and pictures can be seen at this link:


A Beading Tool