Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Tablesaw miter slots - standard distance between?

Posts

Tablesaw miter slots - standard distance between?

#1

Tablesaw miter slots - standard distance between?

Craig Daymon

>I've sold my JET cabinet saw. After I move, I will be replacing it. I built a fairly substantial crosscut sled for the saw and I'm wondering if it is of any value if I decide to get a different brand of saw. I know 3/4" miter slots are standard, but is the distance between slots standard as well?

Thanks,

Craig

Re: Tablesaw miter slots - standard distance between?

#2

Re: Tablesaw miter slots - standard distance betwe

Bri in Mtl

>Nope.

When I replaced my General with a SawStop I had to move one of the runners over about a 1/2" or so.

Re: Tablesaw miter slots - standard distance between?

#3

Re: Tablesaw miter slots - standard distance betwe

Dan Donaldson

>Not only that, but the distance from the blade to the slots varies also.

Re: Tablesaw miter slots - standard distance between?

#4

True

Bri in Mtl

>I ended up with a new slit in my sled.

Re: Tablesaw miter slots - standard distance between?

#5

New Sleds and Jigs/Fixtures, ZCIs

George@Colonel's Workshop-Havertown PA

>Good Afternoon Craig,

I just replaced my Jet Contractor's saw with a Jet Hybrid. I had numerous shop built sleds/jigs/fixtures/and zero clearance inserts for the old saw. I decided to retain those which I thought could be converted. The distance between the saw kerf and the tracks made it an imopractical exercise. Further, I realized that my new saw was left tilt, and the blade/stock registration on the sleds had to differ, especially for dado work. I essentially ruined the old, perfectly aligned jigs to the old saw. I regret not having included them in the sale price. They were very good accessories/tools.

OTOH I made other cross cut and dado sleds just as good for the new Hybrid, and will eventually have replacements for my box joint jigs and zero clearance inserts, aux fence, and tapering jig. Good luck.

George

Re: Tablesaw miter slots - standard distance between?

#6

Thanks. Now I have some thinking to do.

Craig Daymon

>I sold a JET left tilt cabinet saw. I know I'll replace it with a left tilt saw with a riving knife. I THINK that JET now has a "deluxe" cabinet saw fitting that description. I was considering the PM 2000, but it depends on cash flow at the time. Since they're both Wilton products...maybe I'll get lucky? Then again, I'm also thinking upgrade the bandsaw (also sold that) and downgrade the tablesaw. I suspect I can do all I want with a good contractors saw.

Well, it's a few months off. I still have to sell this house before I can even build a new one. I think I'll hold onto the sled for now and keep my fingers crossed it works.

Thanks.

-Craig