Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

FF or 00 biscuit cutter?

Posts

FF or 00 biscuit cutter?

#1

JL

FF or 00 biscuit cutter?

JL

>I've got my Makita 3901 biscuit cutter which will handle 0, 10, 20 and some larger biscuits.

I don't believe that they sell a smaller blade for it to let it cut smaller biscuit sizes.

What are some "inexpensive" smaller biscuit cutters? The LOML has me on a limited tool budget :). In other words, she wouldn't let me buy a duplicate tool without giving me some grief :).

Re: FF or 00 biscuit cutter?

#2

Re: FF or 00 biscuit cutter?

pecker

>I have a slot bit and bearing combo for use in a router that will cut the FF holes. You can probably get it thru places like Eagle America or MLCS Woodworking.

Also, Ryobi makes a detail biscuit cutter, which should be cheap thru Home Depot.

Re: FF or 00 biscuit cutter?

#3

Re: FF or 00 biscuit cutter?

Glenn Madsen, SF Bay Area

>My DeWalt doesn't do the little guys either. My neighbor has a Ryobi, but I couldn't tell you if it's still made.

The Porter Cable had a standard replacement cutter for 00 biscuits at one time, but that's $175 or so... Plus finding the cutter.

There are other ways to cut joinery than biscuits, though.

Re: FF or 00 biscuit cutter?

#4

Re: FF or 00 biscuit cutter?

Thomas S Stockton

>The small cutter comes with the porter-cable. I would go the router bit technique for the low cost option. High cost would be a domino I'm POSITIVE you could convince her it doesn't duplicate what a biscut jointer does.

I've used the little ff biscuts but there is not a lot of glue area thaere and they really are not that strong.

Tom