Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Help with old cypress Questions?

Posts

Help with old cypress Questions?

#1

Help with old cypress Questions?

Barry Irby

>I have some old cypress. At least old to me. It came from the family farm. There used to be a water tank on a tower. The tank was built of cypress and the tank was torn down about 50 years ago and was probably twenty five years old at the time. It is about 5" wide and 1" thick. There may be a hundred board feet. Its been inside a building since the tank came down.

I want to make something out of it, as much as a keep sake as anything else.

I was thinking of a nice garden bench. Most of the benches I have seen call for 8/4 or even 12/4 stock. Any better ideas? Would you buy additional cypress to go with it in their stock? Do you have a bench design that does not call for thicker stock? Would you laminate the stock?

Re: Help with old cypress Questions?

#2

Re: Help with old cypress Questions?

Keith Newton, LR, Arkansas------WebKitFormBoundary

>Sounds like adirondack chair material to me. Maybe you can do a double-wide.

http://www.popularmechanics.com/home_journal/workshop/2919751.html

Re: Help with old cypress Questions?

#3

Ellis Walentine

Engineering is the key

Ellis Walentine

>Engineering is a big part of design, and you can usually find an engineering solution based on the materials at hand, in this case your 1" cypress. I recall one bench I made that had a seat made of 3/4" thick slats, essentially 1x3s. An adequately engineered understructure of cross beams, with a lengthwise beam to add the necessary deflection resistance, did the trick quite nicely. If you don't have time to experiment with the dimensions of your structural members, err on the overkill side.

One other thing about cypress for seating: I recommend choosing only quartersawn material. Flatsawn cypress tends to come apart at the summerwood rings, creating jaggedy, knifelike slivers of wood that can cut you or rip your pants.

Ellis

Re: Help with old cypress Questions?

#4

Re: Help with old cypress Questions?

Barou

>I have built several garden benches out of cypress. The wood came from staved tanks at a liquor distillery - tight straight grain with an occasional 3/4" hole to peg the staves together. I did have to do some laminating to get legs of suitable thickness/width. Use plastic resin or urethane glue for exposure to the weather. The benches look better each year!

Re: Help with old cypress Questions?

#5

Re: Engineering is the key

Lee Schierer - McKean, PA

>I made a yard swing a number of years ago from 3/4" thick cedar. It has held up well. The three supports are three layers thick and glued up with Elmers risorcinol glue. All the fasterners are stainless. I treat it with Thomson water seal every year before it goes outside and it is stored indoors during the winters. Yes, it needs to be sanded to remove the weathering.

Lee


img

Re: Help with old cypress Questions?

#6

Great Ideas, Thanks! I'm thinking on it.

Barry Irby

>Now all I have to do is go get it out from under ten tons of junk.