Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

cleaning carbide

Posts

cleaning carbide

#1

cleaning carbide

DizD

>Every time I see a recommendation for cleaning carbide cutting tools, a brass brush is specified. Is there any reason a fine steel bristle brush couldn't be used? Just wonder if there is a reason for this or if it's just one of those things that gets repeated until its accepted as fact.

Re: cleaning carbide

#2

Re: cleaning carbide

Terry in Edmonton

>I supose that in theory the steel brush could dull the carbide slightly, but I don't know that it would be measurable. Personally I use an old toothbrush and Simple Green. Works fine and the brush is free.

Re: cleaning carbide

#3

Re: cleaning carbide

Carol - now in NC Nebraska

>The brush is used with a liquid. Steel rusts. Brass doesn't. Wouldn't be a bit surprised if it were as simple as that.

Re: cleaning carbide

#4

I agree!

Lee Schierer - McKean, PA

>Carbide is tougher than steel, but it will still chip or dull when it tries to cut it. I would recommend a brass brush or the old tooth brush. I recycle all our used tooth brushes through the shop. They make excellent glue spreaders too.

Lee