Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Passing of a friend *LINK*

Posts

Passing of a friend *LINK*

#1

Passing of a friend *LINK*

Lee Schierer - McKean, PA

>Many of you know Ken Salisbury from various gatherings he attended. Sadly I need to report that he passed away yesterday, May 1, 2008 after a long battle with cancer. Ken was active on another forum more than here and became known to many of us through Badger Pond. We will miss Ken's contributions to woodworking and our forums.

Lee Schierer


Ken Salisbury

Re: Passing of a friend *LINK*

#2

That's sad

Eddie Pacheco; San Jose, Ca.

>He was a helpful and gracious person. I remember him from Badger Pond and he always gave very detailed and informative information.

Re: Passing of a friend *LINK*

#3

Re: Passing of a friend

Tony - Memphis

>Sorry to hear that. He seemed like a really good fella. I asked him a bunch of questions about making pens early on. Thanks for letting us know.

Tony

Re: Passing of a friend *LINK*

#4

I'd been wondering…

Rod Peterson -- Ormond Beach

>I met Ken at Ray Johnson's at the Pond Farewell gathering in February 2003 (although having corresponded over the Pond for some time). He was a nice guy and well respected by all who knew him. I heard stories of kids he coached growing up and seeking him out, so he must have been a fine influence for many years.

He was very enthusiastic on the other forum after the Pond closed, and I'm sure he functioned with the same steady hand as he did with the youths he guided. It's sad that forum doesn't have the same friendly atmosphere as it did when he had the conn.

I tried contacting him several months ago, and getting my emails bounced I was concerned he might have been in the final stages (the cancer was known about for at least a couple of years). Looks like that was the case.

By the way, and you can probably take the measure of the regard in which he was held by this example, but the second day of End o' Pond, Ken's Jet had acquired some additional “decoration.”







I seem to remember a brown Stetson involved as well. Sure will be different without him.

Rod

Re: Passing of a friend *LINK*

#5

Pic of Ken from the End o' Pond party

Rod Peterson -- Ormond Beach

>






Rod

Re: Passing of a friend *LINK*

#6

Very Very Sad

Randy G

>Thank you very much for the update, and that is sad news. Amazingly I had just checked his website to see if there had been any updates. He was very influential in me getting into turning both on Badger Pond and Sawmill.

Re: Passing of a friend *LINK*

#7

Re: Passing of a friend

Lee Patz

>I met Ken at Terry Hatfield's BBQ in Arkansas. I turned my first pen on his Jet mini and have been hooked ever since. I also remember him from Badger Pond and SMC. I learned alot from him and feel blessed to have known him. He will be missed.

Re: Passing of a friend *LINK*

#8

Re: Passing of a friend

George@Colonel's Workshop-Havertown PA

>Good Afternoon Lee,

Thanks for apprising us of Ken's demise. I remember him from the Badger Pond days, and it was my very good fortune to meet him in person at 5ive Barns a couple years ago. Indeed a character, engaging and informative. I'm very sorry to read of his passing.

George

Re: Passing of a friend *LINK*

#9

Re: Passing of a friend

Jim Shaver Oakville, Ont.

>Hi Lee,

I am deeply saddened to hear of his passing. He was a a little crusty on line at times, but when I met him in person at the Good Bye Badger Pond party I realized I did not know the man till I met him...he was a kind and sharing soul.

My condolences to his family and friends...

Take care,

Jim

Re: Passing of a friend *LINK*

#10

Re: Passing of a friend

Tim Greif - West of Chicago

>Wow. I remember Ken (old rebel) back on the Pond. He was always one to offer helpful tips. I never met him in person, but would have been glad to shake his hand. He will be missed.

Re: Passing of a friend *LINK*

#11

Ken S. ....the "old rebel" indeed

Scott in Eastern Iowa

>I too remember Ken from the Badger Pond days......a very smart and deliberate individual in his ways.....and a great woodturner as well.

He will indeed be missed by the Sawmill bunch as a contributor and a moderator as well.

I actually thought of him as I perused SMC the other day, since I haven't read a post by him in quite a while.

Bless you and your family Ken ....and thanks for all your wealth of knowledge you have freely given over the years.

R.I.P.

Re: Passing of a friend *LINK*

#12

Re: Passing of a friend

Jennifer@Indy.USA

>I'm really sad to hear of Ken's passing. He sure did seem ornery on line, but when I met him at the Good Bye Badger Pond party he was the sweetest man you ever did meet. One thing that will forever stick in my mind is how wonderful he was with all the kids there. They gravitated to him. It really was wonderful to witness. My thoughts are with his family, especially his grandkids. They will miss him dearly.

Re: Passing of a friend *LINK*

#13

you doesn't have to call me Thompson…

Rod Peterson -- Ormond Beach

>You can call me Ray, you can call me Jay…(anyone remember that commercial from back in the '70s?

How embarrassing to misremember Ray's name. Sorry.

Rod

Re: Passing of a friend *LINK*

#14

Re: Passing of a friend

Larry Marker

>Sad, indeed. I met him at a craft show in Huntsville a number of years ago and bought a pen from him for my wife. He had a wooden locomotive that he had built on display and it attracted a lot of attention.

Larry

Re: Passing of a friend *LINK*

#15

Re: Re: Remember

Mark Mandell - Gone Round In Jersey

>The name was "Johnson"

[You can call me "Ray-Jay" you can call me "R-J" "but ya doesn't has ta call me 'johnson.'"]

|;-}}}}

Re: Passing of a friend *LINK*

#16

Re: Re: Remember

Al Stokka - Cambridge, Iowa

>The bit came from "Laugh In."

Re: Passing of a friend *LINK*

#17

We enjoyed the time with him

Dan Barber

>Ken will surely be missed by those that knew him. We had the pleasure of his presence at our house at least three different times. He once made a special trip from AL to our house in Nashville just to help my wife sell some of her turnings at a local craft show - a gesture that I did not forget.

Life has kept me too busy too keep up with Ken or even woodworking as of late, but I think about him every time I see a Confederate flag on the back of a vehicle. I really enjoyed talking to him about his life and his interest in kids. My young daughter loved to hear him call her "grandson" - his way of teasing her.

Gentlemen such as Ken are to be missed in more ways than one. They say your life is defined not by your accomplishments but by the friends who remember your affect on them. Ken surely scored on that account.

Have a Bud Light today in Ken's honor - I'm sure he would approve....

Re: Passing of a friend *LINK*

#18

Sometimes I'm too subtle for my own good…

Rod Peterson -- Ormond Beach

>>> you doesn't have to call me Thompson…

> The name was "Johnson"

In my “I'd been wondering…” post above, I had referred to the End o' Pond party held at Ray Thompson's home, near Indianapolis, but I inadvertently called him Ray Johnson. The “you doesn't have to call me Thompson…” was a play on the Johnson routine.

Incidentally, for those who don't have any idea what the heck we're talking about (and for those who'd enjoy the trip back), here's a YouTube link to the original guy, and here's one to the subsequent Busch Natural Light commercial.

Bill Saluga was the performer. Here he is pitching for the Illinois Lottery in 1981 doing the same schtick. I love the internet.

Rod

Re: Passing of a friend *LINK*

#19

Re: Sometimes I'm too

Mark Mandell - Gone Round In Jersey

>. . . .

'Course, I didn't get to go to the Pond Draining Party.

[Been fighting PPD ever since]

|;-}

Re: Passing of a friend *LINK*

#20

Bart Goldberg

Re: Passing of a friend

Bart Goldberg

>My sincere condolences to Ken's family. I remember him from when I first started posting on Badger pond. He was a great guy and a valuable member of our woodworking community. I will miss him.

Regards

Bart

Re: Passing of a friend *LINK*

#21

Character with a capital C. - long

Ray Thompson - Middletown,IN

>Father and grandfather to his own kids. Grandpa to any kid in the vicinity. Coach to a couple of generations of high school football players as a volunteer high school coach. Teacher to anyone who needed help with pens or turning in general. Curmudgeon to any "fool" unlucky enough to wonder by. Consumer of prodigious quantities of Bud light, bottles only please. Good friend to many people going back a number of years and mentor to an equal number.

He fought cancer for nearly 15 years and never gave up and never gave in, but in the end age and the ravages of the disease finally won. RIP old friend.

Ray

Re: Passing of a friend *LINK*

#22

Ray Johnson was here.

Ray Thompson - Middletown,IN

>From the state of Washington, so that part of the confusion is easy. Of course Ray J. is over 6' and skinny as a rail and I'm 5'9" and way north of far to much so there shouldn't be to much difficulty telling us apart.

Ray

Re: Passing of a friend *LINK*

#23

Ellis Walentine

Thanks for the note, Lee

Ellis Walentine

>I only met Ken a couple times, once at Five Barns, and he was sharp, funny and gracious, although he already had cancer at that point. The online woodworking world has lost a major voice. My prayers and best wishes to his family.

Ellis

Re: Passing of a friend *LINK*

#24

Re: Passing of a friend

Howard Norman

>Thanks for posting about Ken's death. I never met Ken in person but I remember him well from the Badger Pond days and when I used to visit SMC. We did correspond by email a few times. He will be missed by many.

My condolences to his family.

Howard

Re: Passing of a friend *LINK*

#25

I am so sad to hear this!

Dominic Greco in Richboro PA

>Lee,

I really appreciate you keeping us in the loop with this. When I read this thread a chill went through me and I said "Ahhhhh....NO!".

I knew Ken from the old Badger Pond days and actually had the pleasure of meeting him at during one of Bill G's BBQs. I found him to be one of the NICEST and most generous people you could ever come across. We spent a good portion of that day swapping stories and generally chewing the fat. Afterwards we kept in touch via email. I remember him sending me a very cool congratulations card when my wife and I adopted our daughter.

He had a wealth of wisdom (not just about wood working) and a very ready wit. He will be sorely missed.

Dominic