Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Working with Teak

Posts

Working with Teak

#1

Working with Teak

Tony - Memphis

>Our local wood supplier had teak on "sale" for $14/bdft for 8/4 stock. Just so happens, I was considering building an outdoor bench as my next project since our wicker version from Pier 1 is at the end of its life. Anyway, I've never worked teak before, but I seemed to recall some possible glueing issues? I thought I remembered that an epoxy meant for marine use was a good soltion. I've used a lot of the cheap epoxy, but never invested in the good stuff. Any input on working or glueing teak would be appreciated. I'm waiting to finish my current project and to pick a cushion before I build. I'm going to build it to fit a "standard" sixed cushion if there is such a thing. We will at least buy from a company we think will be around long enough to supply a replacement when needed.

Thanks,

Tony

Re: Working with Teak

#2

Jesper, Denmark

Re: Working with Teak

Jesper, Denmark

>There is no magic either working with or glueing teak. It is a litle oily, so wiping the glue surfaces with acetone before glueing is a good idea.

You probably would not use too many glue joints on an outdoor project anyway.

Re: Working with Teak

#3

Re: Working with Teak

Tony - Memphis

>Thanks. Yeah, I am going to try and not depend on glue. I will screw (stainless) where I need to and am considering pegging everything like they did in the old days. Considering the dowel plate at Lie Nielsen for this and other projects. We have a couple of items we have purchased for the yard that are coming apart. Sad because with a little more effort, they could last for a very long time. I would like for mine to last a while.

Tony

Re: Working with Teak

#4

Jesper, Denmark

Re: Working with Teak

Jesper, Denmark

>In your climate, with a little brushing with detergent and water, it will weather to a beautiful silver gray the first year.

To my way of thinking, oiling etc. is a no-no.

If you have access to Black Locust lumber, it is much cheaper and lasts longer than teak, but weather just as nice. Just be aware that it has it's own mind about being worked!

Re: Working with Teak

#5

Re: Working with Teak

Ray Newman

>Ditto on what others said about teak being oily & wiping it down.

To further enhance longevity, coat the end grain of the legs that sit on the ground/concrete w/ epoxy. This will dampen the effect of the any wood�s tendency to absorb moisture.

I also recall reading that teak is naturally abrasive & will quickly dull cutting tools.

Re: Working with Teak

#6

Re: Working with Teak

Mark Mandell - Gone Round In Jersey

>Tony,

Teak has a high silica content, so carbide tools are a must. Abrasive planing and jointing is also recommended as the stuff will blunt HS knives pretty quickly.

Pegged tenon construction works well as do swedged through-tenons and 2-part marine adhesives. Suggest you pre-wax the outside surfaces around glue joints to make removal of any squeeze easy and prevent staining. Wax comes off with MS or naptha.

Black locust and cypress are very economical alternatives to $14/bf.

Re: Working with Teak

#7

Thanks

Tony - Memphis

>Ironically, the black locusts are blooming like crazy around here. I've never see it for sale around here. Thanks for the advice though, I'll have to see if I can hunt some down for future projects. We only have one real wood supplier around here that I know of and their selection is bleak. I bet they have had this teak sitting around for a long long time. I'll just have to include soem tooling costs in the overall cost of this project. I'll use my planer knives that are kind of nicked up anyway and my jointer knives could stand sharpening anyway too. I'm anxious to see what's under the crud on the outside of these boards. They look really bad. What grain I could see looks nice and the color under the crud looks pretty good. Thanks for the help.

Tony

Re: Working with Teak

#8

black locust

John K Jordan

>You might try asking for black locust at small local sawmills. They may have some or can get it. I cut it occasionally on my own sawmill, mostly for stakes and boards that are in contact with the ground. It's a difficult wood to cut and dulls the blades quickly so I only saw what I need. The way it grows, the large stuff is full of cracks and voids (at least that I've cut) so finding wide, clear boards may be difficult.

Re: Working with Teak

#9

Re: black locust

Tony - Memphis

>I just recently learned what those white blooming trees around here were. We have a really nice natural area behind our complex here at work and they recently labeled a lot of the trees. I have noticed that a lot of the black locusts don't look like a tree you'd harvest for lumber based on the size and the lack of nice long straight clean sections. Really nice to look at this time of year though. They seem to smell nice too.

Tony