Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Under the Cosmo............line that is. *LINK*

Posts

Under the Cosmo............line that is. *LINK*

#1

Alan Young

Under the Cosmo............line that is. *LINK*

Alan Young

>Thanks for all the cosmoline removal tips last week. Here's what was hiding underneath it all:

A Mill Drill- 1.5 HP

Table: 8-1/4" x 28-3/4" X axis table travel: 19-3/4" Y Axis table travel: 7-3/8"


It's really a metalworking machine. I have been considering one of these for quite while. Then the Festool Domino came out and I was about ready to go that direction but I have found the advantages to having metal working options too. I'll be using this for mortising-maybe even running tenons, and the head can spin 180 degrees so I can envision the operation where I'll need to drill a hole through a long piece that I'll jig to the floor etc....

This machine is 43.5 inches high and weighs nearly 700 lbs. Moving it into my basement shop was an adventure that required a bit of thought.

Below is a link to the story in Pictures....

(No woodworker was hurt or abused in the documentation or moving process.)

Alan


Moving a 700 lb Mill-Drill

Re: Under the Cosmo............line that is. *LINK*

#2

Re: Under the Cosmo............line that is.

Thomas Skaggs

>We know that it slices and it dices but can it make julienne fries? ;-)

Tom