Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Sorta OT: Engineered flooring level?

Posts

Sorta OT: Engineered flooring level?

#1

Sorta OT: Engineered flooring level?

Bill Howatt

>Hi,

I am putting down engineered flooring (3/8"ply with 1/8 hardwood). The spec is floor level to about 1/8 over 10'. My floor was greatly out-of-kilter but I have fixed the worst of it but am struggling with the last bit. I have never done anything like this before.

Regarding the little dips along my straight-edge - just how close does it really have to be so I don't notice it when walking on it and the joints aren't going to fail prematurely. There will be a thin (about 5/32 or so) rubber mat underneath it.

When you are laying it, can you tell it it isn't right because of a levelling problem or is it only when it is all down and you walk on it?

Thanks,

Bill, who thinks carpets are a good idea.

Re: Sorta OT: Engineered flooring level?

#2

Jim in Burlington Ont.

Perfectly flat floor

Jim in Burlington On

>There aren't any perfectly flat floors. I really prefer to lay down a layer of tar paper to help level things out. It helps cushion the floor and even things out. Keeps the squeeks down also. Belt sander is a handy tool to have to knock the ocassional high spot down when doing floor prep. Worry more about nails that are high they will show thru horribly later on.